Vynil top on non vynil top e body

[DocMel]

I'm seriuosly considering having a vynil top installed on my 71 Cuda.  Besides the material, what other things, such as trim, are needed?  Any modification needed?

Id like a stock/factory vynil top look

[brads70]

I'm curious how the trim would fasten to a car not equiped with a vinal roof? 

[72cudamaan]

Screw gun of course    Seriously though, I don't have a vinyl top
but aren't there screw on tabs for the trim to clip to?

[vinb]

Go to this site and use #146's on page 13...

 you will need 14,  $15.60 box of 25..

http://www.wesales.com/pdf/2011-12%20WEBCATALOG.pdf

[brads70]

Go to this site and use #146's on page 13...

 you will need 14,  $15.60 box of 25..

http://www.wesales.com/pdf/2011-12%20WEBCATALOG.pdf

Thanks! So with these you drill a hole and bolt them in position? How do you get to the backside to bolt them on? Doesn't the roof structure get in the way? 

[4 speed fish]

Sent pm

[vinb]

I still have the studs on mine and before I put the new vinyl on I'm going to remove the studs and use those #146's. It will keep the mldg nice and tight rather than the old plastic clips...

I looked underneath and you will have access to put the washers and nuts on..

I'll take a couple of photos later in the day today..