Author Topic: Package tray  (Read 2467 times)

Offline 300

  • Jr. Member
  • **
  • Posts: 284
  • 69 chevelle,67chevelle , 70 barracuda
Package tray
« on: February 09, 2012 - 11:26:18 AM »
Hello. On a 70 Cuda does the rear package trap go over or under or even butt up to the rear door panels, Also the sail panels go under the rear quarter panels Thanks. PS is the package tray glue Dow no clip or nothing. Thanks





Offline 300

  • Jr. Member
  • **
  • Posts: 284
  • 69 chevelle,67chevelle , 70 barracuda
Re: Package tray
« Reply #2 on: February 09, 2012 - 01:13:33 PM »
Thanks for info onclips,  How about the alignment on tray as in my post Thanks

Offline Grec

  • The '73 Chrysler should have made...
  • Full Member
  • ***
  • Posts: 974
Re: Package tray
« Reply #3 on: February 09, 2012 - 08:29:16 PM »
Can't see why they would vary between models...

But on my 73 Challenger, the package goes under the rear side panels, under the lip of rear window trim, front lip covered by rear seat back.

When you look at it assembled, all package tray edges are covered.
1973 Challenger Rallye
- 440 Six Pack
- A833 4 Speed, 18 Spline
- FE5 Rallye Red on Black

Offline Grec

  • The '73 Chrysler should have made...
  • Full Member
  • ***
  • Posts: 974
Re: Package tray
« Reply #4 on: February 09, 2012 - 08:32:14 PM »
Also, my advice would be to skip the clips. They're really pointless as the seat back will hold the front edge of the package tray down firmly.

All the clips will do is make it a pain in the a$$ to remove and install again. :-)
1973 Challenger Rallye
- 440 Six Pack
- A833 4 Speed, 18 Spline
- FE5 Rallye Red on Black

Offline highberg

  • Jr. Member
  • **
  • Posts: 63
Re: Package tray
« Reply #5 on: February 10, 2012 - 08:38:14 AM »
Package tray definitely goes under rear quarter panels all models
Classic Restorations

1973 Cuda 496 Stroker NOS
1971 440+6 4 Speed Roadrunner
1961 Shortbox Fleetside D100
1970 Dodge Dude 383 Auto
2009 SRT8 Challenger 6 Speed