Author Topic: Auto shifter handle options? (Read 25674 times)

MEK-Dangerfield · « **Reply #60 on:** February 15, 2012 - 11:16:50 AM »

Quote from: highberg on February 14, 2012 - 11:20:02 PM

Did that rubber sleeve come with your shifter handle? I got a gunslinger but no sleeve and had to make something up. Didn't much like that about it.

I'm not sure what you mean. Maybe it's my crappy pictures, but there isn't a rubber sleeve.

highberg · « **Reply #61 on:** February 16, 2012 - 11:39:39 PM »

I'm talking about the one on the bottom of the shifter that takes up the loose space on the shift slider plate. The old slapsitck fit this hole and moved the shift indicator properly. If the shifter bottom was made about and inch longer, it would have fit in the hole and taken care of the problem. I considered buying a new plate for the 70 shifter just to cut it out to fit better. I noticed a rubber around the bottom of your new shifter that would eliminate it.

MEK-Dangerfield · « **Reply #62 on:** February 17, 2012 - 05:49:55 PM »

Quote from: highberg on February 16, 2012 - 11:39:39 PM

I'm talking about the one on the bottom of the shifter that takes up the loose space on the shift slider plate. The old slapsitck fit this hole and moved the shift indicator properly. If the shifter bottom was made about and inch longer, it would have fit in the hole and taken care of the problem. I considered buying a new plate for the 70 shifter just to cut it out to fit better. I noticed a rubber around the bottom of your new shifter that would eliminate it.

Do you have a 70 E-Body? I really don't remember having to do any mods. I can take better pictures if you'd like.

brads70 · « **Reply #63 on:** February 17, 2012 - 06:10:47 PM »

Quote from: 4drbrnko on November 10, 2009 - 07:53:17 PM

Gunslinger from the side.

I think he means this picture Mike?

walkAbout · « **Reply #64 on:** February 18, 2012 - 05:16:08 AM »

Hi,

as I rebuilt my 70 shifter recently I read a lot across the internet. The attached pic is from SLapStik problems and Are These Slapstick Parts? � The Dodge Challenger Message Board There you see the different holes in the plastic shifter plate. The one on the right is for the 70 (maybe 71 too, but I dunno correctly).Depending on this you need to get the right shifter I guess.

CU

walkAbout

highberg · « **Reply #65 on:** February 18, 2012 - 08:24:03 AM »

You bet. That's the one. The 72 up have the big square hole for the slapstick t handle and the gunslinger doesn't go down enough to fill it. I fab'd a piece but the shift indicator doesn't always line up properly (mostly park and first). I was wondering if gunslinger was supposed to include a sleeve for that purpose.

Quote from: brads70 on February 17, 2012 - 06:10:47 PM

I think he means this picture Mike?

Author Topic: Auto shifter handle options? (Read 25674 times)

MEK-Dangerfield

Re: Auto shifter handle options?

highberg

Re: Auto shifter handle options?

MEK-Dangerfield

Re: Auto shifter handle options?

brads70

Re: Auto shifter handle options?

walkAbout

Re: Auto shifter handle options?

highberg

Re: Auto shifter handle options?