Author Topic: 1970 Challenger AC Car Map Light Assembly (Read 1841 times)

cv70chall · « **on:** February 16, 2012 - 08:28:07 AM »

Does anyone have a good photo showing the exact location of the Map Light Assembly on a 70 AC Car? I'm ready to install this part and will be using the plastic lower bezel piece but tell for sure how this assembly installs. There is that piece of metal/ bracket that I can't figure out as well.

Thanks!

Matt70 · « **Reply #1 on:** February 16, 2012 - 08:31:46 AM »

Will this work?

cv70chall · « **Reply #2 on:** February 16, 2012 - 12:49:30 PM »

Yes, I can clearly see where it goes, thanks! Do you have a photo of where the metal bracket goes? It's the piece that attaches to the black lamp assembly.
Thanks!

Grec · « **Reply #3 on:** February 16, 2012 - 01:45:06 PM »

Don't have a pic, but keep in mind the metal bracket's sole purpose is to ground the map light, as AC cars have a plastic bezel (ie no ground) where non-AC cars do not.

I would just look in the near area for the hole on the metal dash frame...

cv70chall · « **Reply #4 on:** February 16, 2012 - 03:49:55 PM »

Good point thanks!

Grec · « **Reply #5 on:** February 16, 2012 - 05:05:48 PM »

err... it's the switch we're talking about here by the way, not the light piece. That's where the ground comes from in a stock install.

Giveitawack · « **Reply #6 on:** February 29, 2012 - 01:46:53 PM »

The metal strap grounds the switch

Author Topic: 1970 Challenger AC Car Map Light Assembly (Read 1841 times)

cv70chall

1970 Challenger AC Car Map Light Assembly

Matt70

Re: 1970 Challenger AC Car Map Light Assembly

cv70chall

Re: 1970 Challenger AC Car Map Light Assembly

Grec

Re: 1970 Challenger AC Car Map Light Assembly

cv70chall

Re: 1970 Challenger AC Car Map Light Assembly

Grec

Re: 1970 Challenger AC Car Map Light Assembly

Giveitawack

Re: 1970 Challenger AC Car Map Light Assembly