10.95 clutch ??

[gargoyle]

Ok, here is the set up..... 440,  130 tooth flywheel, 10.95 23 spline RAM clutch.  Will it fit? Worried   The bolt holes line up....... but... kinda worried something might go wrong

[Chryco Psycho]

sounds right , I assume the flywheel is 6 bolt not 8 bolt , I assume you have the alum belhousing ?

[gargoyle]

sounds right , I assume the flywheel is 6 bolt not 8 bolt , I assume you have the alum belhousing ?

yes, 6 bolt... i "think" it's an alum belhousing?  not to sure though.  how can i tell?  (sorry for the dumb question)

[Chryco Psycho]

well the quick way is to put a magnet on it , if it falls off it is alum , if it sticks it is iron LOL

[gargoyle]

well the quick way is to put a magnet on it , if it falls off it is alum , if it sticks it is iron LOL

Right!!??  Ok, so if it's one or the other, how would that fit different?  I guess im worried about this due t my local mopar shop told me that it. WON'T fit. That the 10.95 is for the 11" flywheel. Yearone said the 10.5 and10.95 go on the 130 tooth flywheel.

[Chryco Psycho]

the confusion comes from the 130 & 143 tooth flywheel , the iron bel is for the 143 tooth & takes the 11" clutch
the alum bel 130 tooth flywheel take the 10.95"
 both use the same 11" disc the 10.95 is just a designation to make the clarification between the 130 & 143 tooth flywheel .