How to remove the heaterbox (w/ AC) without taking the dash apart

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: How to remove the heaterbox (w/ AC) without taking the dash apart  (Read 1736 times)

    Offline widing'cuda

    • Full Member
    • ***
    • Posts: 586
    • 70 'cuda383 - BS23N0E
      • w i d i n g ' c u d a
    How to remove the heaterbox (w/ AC) without taking the dash apart
    « on: October 14, 2006 - 06:46:24 PM »
    Has anyone sucesfully removed the heater box on a 70 'Cuda with A/C? If so. How is it done. What bolt, etc do I need to remove. The reason I'm asking is because I'm replacing the heater core, as it's leaking. Illustatiosn would be nive as well from the parts manual. I have the service manual and there no images on how it's done.
    Logged

    - Jørgen - Norwegian Mopar fanatic

    1970 Plymouth 'Cuda 383 A833 8-3/4 3.23 suregrip
    http://cuda.widing.biz/


    Offline 4Cruizn

    • Administrator
    • C-C.com Expert
    • *****
    • Posts: 18521
    • HEMI FISH
    Re: How to remove the heaterbox (w/ AC) without taking the dash apart
    « Reply #1 on: October 14, 2006 - 09:16:32 PM »
    The studs that hold it are on the firewall area.  I pulled the dash before I tackled it.  Not that difficult . .  :2thumbs:
    Logged

    Offline mrbill426

    • Full Member
    • ***
    • Posts: 775
      • All Around Mopars
    Re: How to remove the heaterbox (w/ AC) without taking the dash apart
    « Reply #2 on: June 24, 2009 - 11:01:34 AM »
    Besides the two obvious bolts on each side above the kick panels, how many and where are the other screws/bolts that hold the dash in?  Do you have to remove the instrument panel first?  Mine is a '72.

    Thanks

     :working:
    Logged
    MOPAR or NO car!

    '72 'Cuda 340, white on white
    '72 Sebring; bracket project
    '64 Imperial Crown black on black
    '66 Imperial Crown; parts car

    Offline r15303

    • Jr. Member
    • **
    • Posts: 354
    Re: How to remove the heaterbox (w/ AC) without taking the dash apart
    « Reply #3 on: June 24, 2009 - 05:47:57 PM »
     :popcorn:
    Logged

    Offline 4THECHALLENGE

    • Jr. Member
    • **
    • Posts: 374
    Re: How to remove the heaterbox (w/ AC) without taking the dash apart
    « Reply #4 on: August 13, 2009 - 08:12:40 PM »
    anyone??  :misbehaving:
    Logged

    Alaskan_TA

    • Guest
    Re: How to remove the heaterbox (w/ AC) without taking the dash apart
    « Reply #5 on: August 13, 2009 - 09:08:34 PM »
    Logged

    Offline widing'cuda

    • Full Member
    • ***
    • Posts: 586
    • 70 'cuda383 - BS23N0E
      • w i d i n g ' c u d a
    Re: How to remove the heaterbox (w/ AC) without taking the dash apart
    « Reply #6 on: August 16, 2009 - 05:27:24 AM »
    I ended up removing the dash as ther are one bolt you can't get to without the dash out of the way.
    Logged

    - Jørgen - Norwegian Mopar fanatic

    1970 Plymouth 'Cuda 383 A833 8-3/4 3.23 suregrip
    http://cuda.widing.biz/

    Offline 4THECHALLENGE

    • Jr. Member
    • **
    • Posts: 374
    Re: How to remove the heaterbox (w/ AC) without taking the dash apart
    « Reply #7 on: September 15, 2009 - 11:43:13 PM »
    well that sucks! but hey at least u tried  :cheers:
    i guess ill just have mine removed as well.
    Logged

    Offline mrbill426

    • Full Member
    • ***
    • Posts: 775
      • All Around Mopars
    Re: How to remove the heaterbox (w/ AC) without taking the dash apart
    « Reply #8 on: April 18, 2012 - 11:49:58 AM »
    When I removed my heater/AC box I found that the plastic defrost ducting was not secured to the front cowell at the top, only the one stud/nut bottom center was holding it in.  As such the ducting was hardly aligned with the slots in the dash pad.  :eek7:  Anyone else run into this?

    I know the car has had front collision work done in the past, but there were no screw marks on the ducting to indicate it was ever secured at the top, and the screw holes in the sheetmetal were unscored.

     :working:
    Logged
    MOPAR or NO car!

    '72 'Cuda 340, white on white
    '72 Sebring; bracket project
    '64 Imperial Crown black on black
    '66 Imperial Crown; parts car
    Pages: [1]
    « previous next »