need name or code for 69-70 stock engine spray paint, please

[burdar]

I'm going with PlastiKote Chrysler blue for my 318.  I compaired it to some original paint on the front side of the torque conv.  The original paint is just a hair lighter.  I'm assuming it has faded a little with all the heat cycles.

[MEK-Dangerfield]

Just to throw out another option. I went with the POR-15 brush on paint.

    http://www.por15.com/ENGINE-ENAMEL/productinfo/EEPA/

It takes two coats, and you definitely don't want to get this on your skin or finger nails.     It takes days of looking foolish before it wears off. 

[Jocigar]

I'll get both and post pics compared the 1990s mopar hemi orange that's on my engine.  Ordered plasikote on amazon for 12 shipped, going local for the mopar paint    Thx!!

[Jamiez]

Wow I didn't know they made POR in engine paint and colors

[ChallengerHK]

I'm guessing that the POR engine paint is a lot like the other POR products. If you use it, make sure you use the etching prep they sell on the bare metal first, else it won't stick worth 

[MEK-Dangerfield]

I'm guessing that the POR engine paint is a lot like the other POR products. If you use it, make sure you use the etching prep they sell on the bare metal first, else it won't stick worth 

I had to degrease the engine first. Then there was some alkaline solution I had to spray on(You maybe right in that they called it a prep). Then paint. It's been on there for 6 years now, so I guess I did something right... Besides getting paint on my hands.     Seriously, wear latex gloves at ALL times!

[1970 RT Challenger 1970]

 

[72ls5fla]

if you want the right stuff, you can buy from Roger Gibson. 
He has it listed on his parts PDF.
Comes in a pint can - it is lead based enamel I think.  Needs to be thinned out before spraying.


http://www.rogergibsonautorestoration.com/index.htm


click on the products button and download the PDF.

I think you need to contact Frank Badalson  @ 804.275.2155    to make the purchase.

Bill