1973 Challenger to 72 bumpers

[MOPAR-or-NoCar73]

Hi everyone,
   For my 73 I wanted to move the bumpers in closer and remove the large bumper guards. I have received advice from some members on how to do the conversion while reusing parts (73 bumper, etc.), but I think I just want to go the route of buying new reproduction parts since they are available. I am just wondering if my list below is complete and if I need any additional parts to do this conversion like rubber moldings to fill gaps around the bumper like my 73 has. Thanks.

https://www.autometaldirect.com/store/productdetail/100-2572-S/72-Dodge-Challenger-Front-RearBumper-Set?view=productdetail&stockNumber=100-2572-S&BOMReference=100-2572-S&selectedcat=&prod_cat=&desc=72-Dodge-Challenger-Front/RearBumper-Set

https://www.autometaldirect.com/store/productdetail/105-2570-1S?view=productdetail&stockNumber=105-2570-1S&BOMReference=105-2570-1S

https://www.autometaldirect.com/store/productdetail/980-2570-P/70-72-Dodge-Challenger-Rear-Bumper-Guards---Pair?view=productdetail&stockNumber=980-2570-P&BOMReference=&selectedcat=&prod_cat=&desc=70-72-Dodge-Challenger-Rear-Bumper-Guards---Pair

https://www.autometaldirect.com/store/productdetail/101-1000-16S?view=productdetail&stockNumber=101-1000-16S&BOMReference=101-1000-16S

[burdar]

I don't think your going to be happy with AMD bumpers.  Dave at Roseville(a sponsor here) sells Keystone bumpers.  They are nicer then the bumpers from AMD.  He also sells bumper brackets and the stainless carriage bolts.  I know he offers a discount so contact him for prices.

You're also going to need the two rubber filler pieces that were on the ends of the 70-72 front bumpers.  I think Dave sells those as well.  70-72's had a metal filler piece below the tail panel.  If you don't use that filler, you'll see the ground between the bumper and tail panel.

[mopardave]

Anthony i'll email you this.  thanks