73 challenger rallye 340 car part out

Author Topic: 73 challenger rallye 340 car part out  (Read 4285 times)

Offline SilverChally

  • Sr. Member
  • ****
  • Posts: 1105
73 challenger rallye 340 car part out
« on: June 01, 2015 - 12:29:18 PM »
Parting mostly complete 73 challenger rallye, original 340 auto 8-3/4 car. I'm keeping some parts for a future project, but being a 71 vert, a lot will be available that I can't use. 

Rallye gauges/cluster,  sold

rallye dash wiring harness, sold

switch bezel with switches sold

rally heater controls sold

Bucket seats, sold

45.6 7260 u-joint driveshaft. sold

Ralley Side scoops sold

72-74 Tail lights, sold

Original pair of wiper arms/blades sold

3 speed style wiper linkage sold

Tie down/shipping brackets for rear rails, $50 pair shipped are pitted

Console/shifter brackets, sold

Slapstick, rods, shifter, etc... Mechanism will need soaked as its stucked but not real rusty, t handle does has a crack, good rods and so on. $125 shipped

Good rear side windows, clear, regulators, tracks etc...sold

rear glass, have clear and tinted, $100 each plus shipping

headliner bows sold

340 four barrel emblems sold

exhaust manifolds sold

I have a lot more parts too... some still not pulled, but everything listed so far is ready to go.

PM me here or email gd1996 at yahoo dot com
« Last Edit: March 02, 2016 - 01:59:01 AM by SilverChally »
70 challenger project
68 satellite




Offline SilverChally

  • Sr. Member
  • ****
  • Posts: 1105
Re: 73 challenger rallye 340 car part out
« Reply #1 on: June 16, 2015 - 11:57:31 AM »
Updated and prices reduced
70 challenger project
68 satellite

Offline blown motor

  • Resident
  • *****
  • Posts: 3013
Re: 73 challenger rallye 340 car part out
« Reply #2 on: June 16, 2015 - 03:42:46 PM »
Is the trim any good. Interested in the lower front valance, upper grill and driver's side of A post.
In search of the eternal buzz!

Offline Edison1970

  • Jr. Member
  • **
  • Posts: 489
Re: 73 challenger rallye 340 car part out
« Reply #3 on: June 16, 2015 - 07:09:31 PM »
How about the lower radiator support?  It's the piece that ties the 2 frame rails together under the radiator.
Thanks

Offline challenger_73

  • Jr. Member
  • **
  • Posts: 444
Re: 73 challenger rallye 340 car part out
« Reply #4 on: June 29, 2015 - 10:00:46 AM »
I’m looking for the passenger side drip rail molding. I’m looking for the rear piece. The piece above the quarter window. Trying to find one that has no dents or dings.also looking for the grill alumium trim and the lower front valence trim.

challenger_73
« Last Edit: June 29, 2015 - 10:03:35 AM by challenger_73 »

Offline SilverChally

  • Sr. Member
  • ****
  • Posts: 1105
Re: 73 challenger rallye 340 car part out
« Reply #5 on: June 29, 2015 - 10:05:13 AM »
I do have the ds drip rail.  Need to check the condition.

Doubt I have a good lower rad support, all my parts cars were rust buckets.

No good on the thermoquad, had a holley on it.

Do have some trim for the valance/grill and such, but nothing mint.
70 challenger project
68 satellite

Offline challenger_73

  • Jr. Member
  • **
  • Posts: 444
Re: 73 challenger rallye 340 car part out
« Reply #6 on: June 29, 2015 - 03:09:50 PM »
Just looking for pieces without dents or dings.


Offline brotow

  • Full Member
  • ***
  • Posts: 826
  • There really is a Challenger in the backround
Re: 73 challenger rallye 340 car part out
« Reply #7 on: June 29, 2015 - 06:34:53 PM »
Would you have an automatic transmission dipstick?
70 Chall. vert.(in process) - 73 Amx -74 Javelin- 87 Wrangler-02 Sebring conv. 2005 Crossfire srt roadster

Offline Kenny714

  • Jr. Member
  • **
  • Posts: 18
Re: 73 challenger rallye 340 car part out
« Reply #8 on: July 01, 2015 - 09:23:56 AM »
Trying to locate the hooks and brackets that hold the rear seat and backrest in. Previous owner was trying to make a drag car and cut the pieces out. Not sure if you are willing to cut them out but, I'm willing to pay for your time.
Thanx, KENNY
72 Challenger
78 Bronco
86 Bronco
68 M35A2
05 Excursion

Offline SilverChally

  • Sr. Member
  • ****
  • Posts: 1105
Re: 73 challenger rallye 340 car part out
« Reply #9 on: July 01, 2015 - 06:43:14 PM »
Just looking for pieces without dents or dings.

Yes I do have a good ds, ps is the bad one.

I have a dipstick/tube if it pulls out without breaking like a lot seem to do.

I don't have the rear seat stuff anymore... your a few days too late there, hauled that stuff in with scrap the other day.
70 challenger project
68 satellite

Offline brotow

  • Full Member
  • ***
  • Posts: 826
  • There really is a Challenger in the backround
Re: 73 challenger rallye 340 car part out
« Reply #10 on: July 04, 2015 - 01:25:12 PM »
I would be interested in the dip stick and tube if it's for a 904.
70 Chall. vert.(in process) - 73 Amx -74 Javelin- 87 Wrangler-02 Sebring conv. 2005 Crossfire srt roadster

Offline autobohn

  • Jr. Member
  • **
  • Posts: 4
Re: 73 challenger rallye 340 car part out
« Reply #11 on: July 19, 2015 - 10:02:26 PM »
Looking for rear sway bar and brackets

Offline 73challenger11

  • Newbie
  • *
  • Posts: 1
Re: 73 challenger rallye 340 car part out
« Reply #12 on: July 21, 2015 - 04:10:38 PM »
Do you have the brackets that the horns attach to? There are two pieces, the one that attaches to the center vertical support and the one that attaches to the bottom of the header panel. Like the ones in the picture?