Author Topic: Grinding  (Read 1348 times)

Offline mojavered

  • Full Member
  • ***
  • Posts: 853
  • Someday!
Grinding
« on: May 16, 2012 - 02:20:54 PM »
I have an occasional grinding feeling in the front end when I apply the brakes.  It is not every time, but seems like it is more common after I have been driving a little while????  Front disk, drilled and slotted rotors, standard pads, rear drum.  Any ideas?  Stops fine, just kind of scary feeling.  Thanks!
Jason




Offline HP_Cuda

  • Hit the skinny little pedal on the right!
  • Sr. Resident
  • ******
  • Posts: 5268
  • Mopar or No Car!
Re: Grinding
« Reply #1 on: May 16, 2012 - 02:24:54 PM »

Metal on metal. Check your rotors and brake pads, sounds like it's time for a change.
1970 Cuda Clone 440 4 speed - sublime green
1970 Cuda 383 4 speed - yellow - SOLD

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Grinding
« Reply #2 on: May 17, 2012 - 07:50:19 AM »
a spring could have fallen off inside the drum

Challenger - You`ll wish You Hadn`t

Offline mojavered

  • Full Member
  • ***
  • Posts: 853
  • Someday!
Re: Grinding
« Reply #3 on: May 18, 2012 - 07:14:00 PM »
All the pads are pretty close to new, somewhere between 1-1.5K in them.  Might have to check the rears to see if there is a spring or something loose.  I guess if that is the case, and there has been some grinding, may be looking @ some new drums????  Have to wait and see.
Jason

Offline Jamiez

  • Sr. Member
  • ****
  • Posts: 1981
  • Retro
Re: Grinding
« Reply #4 on: May 18, 2012 - 07:21:55 PM »
Drum rebuild kits are pretty affordable.  I bought one off ebay a few months ago and swapped the springs pretty easily.  I do recommend picking up the brake tool for removing the springs with the nails...it's frustrating to reinstall them without the tool.

Offline mojavered

  • Full Member
  • ***
  • Posts: 853
  • Someday!
Re: Grinding
« Reply #5 on: May 20, 2012 - 10:31:59 PM »
I do recommend picking up the brake tool for removing the springs with the nails...it's frustrating to reinstall them without the tool.
It definitely can be very frustrating.  Thanks!
Jason

Offline dodj

  • Sr. Resident
  • ******
  • Posts: 6197
Re: Grinding
« Reply #6 on: May 23, 2012 - 08:37:35 PM »
Is it possible you managed to get a pebble or something stuck between the shield/rotor/caliper?
Scott
1973 Challenger  440 4 spd 
2007.5 3500 6.7 Cummins Diesel, Anarchy tuned.
Good friends don't let friends do stupid things. ........alone.

Offline brads70

  • C-C.com Expert
  • ********
  • Posts: 18747
Re: Grinding
« Reply #7 on: May 23, 2012 - 08:55:51 PM »
Is it possible you managed to get a pebble or something stuck between the shield/rotor/caliper?

That's what I was sort of thinking. Or maybe a bent sheild?
Brad
1970 Challenger 451stroker/4L60 auto OD
Barrie,Ontario,Canada
Proud to own one of the best cars ever made!!!!!

My restoration thread 
http://www.cuda-challenger.com/cc/index.php?topic=59072.0
 My handling upgrade post
http://www.cuda-challenger.com/cc/index.php?topic=73985.0

Offline 73restomod

  • Full Member
  • ***
  • Posts: 528
Re: Grinding
« Reply #8 on: July 11, 2012 - 11:22:53 PM »
A seized caliper can make that noise, generally caused by worn/under lubricated caliper pins.  If its coming from the rear drums, check the wear in the wheel cylinder. They can get worn to the point that the piston can cock in the bore and hang up.

Sent from my DROID RAZR using Tapatalk 2

Offline mojavered

  • Full Member
  • ***
  • Posts: 853
  • Someday!
Re: Grinding
« Reply #9 on: July 16, 2012 - 06:58:09 PM »
I still have not put it up on stands to see what is going on.  I just have a bunch of excuses of why I have not, but it sure is hot out there!
Jason