A-833 out of a 76-78 Aspen into a 73 small block challenger

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: A-833 out of a 76-78 Aspen into a 73 small block challenger  (Read 1410 times)

    Offline kowalski

    • Jr. Member
    • **
    • Posts: 173
    • Challenger=SCCA Trans Am Homologation Special
    A-833 out of a 76-78 Aspen into a 73 small block challenger
    « on: February 19, 2005 - 09:33:38 PM »
    I have just procured the 4 speed that I have been looking for forever!!!!!    :driving:  It's out of a slant six aspen somewhere between 76 and 78 I don't now when!  (Is this an OD tranny?)  I was wondering what if anything I would have to do to get my new tranny into my 73 chally!  bellhousing swap of course but what else?  tailshaft swap?  if so where can I get a cheap tailshaft and where can I get the pedal assembly and shifter assembly and all that other good "4 speed stuff"? Thanks for your input as always.  P.S. by the way, anybody wanna buy a built smallblock 904 with a shift kit with less than 150 miles on it?
    « Last Edit: February 19, 2005 - 09:37:33 PM by kowalski »
    Logged
    1970 318 bored .060 over edelbrock performer intake ported and polished 360 J heads 2.02 intake 1.60 exhaust double springs carter hi cap fuel pump edelbrock victor series water pump MSD 6AL flotech headers


    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: A-833 out of a 76-78 Aspen into a 73 small block challenger
    « Reply #1 on: February 19, 2005 - 11:48:47 PM »
    Umm Yeah
    it is a OD tranny
     the A body is the short shaft version & basically will not bolt into a Chall ,, the short shaft version is harder to find & usually is worth more though so you may be able to trade , or the main shaft & tailhousing can be swapped , but it shoul dbe easier to find a tranny than just the needed parts
     Passon Performance Or Brewers can help with the needed parts 
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline kowalski

    • Jr. Member
    • **
    • Posts: 173
    • Challenger=SCCA Trans Am Homologation Special
    Re: A-833 out of a 76-78 Aspen into a 73 small block challenger
    « Reply #2 on: February 20, 2005 - 12:27:27 AM »
    hey chryco do you know anyone who would want to trade trannys with me or just mainshaft and tailhousing?  How much would the mainshaft and tailhousing be if I were to buy them?  thanks for your help
    Logged
    1970 318 bored .060 over edelbrock performer intake ported and polished 360 J heads 2.02 intake 1.60 exhaust double springs carter hi cap fuel pump edelbrock victor series water pump MSD 6AL flotech headers

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: A-833 out of a 76-78 Aspen into a 73 small block challenger
    « Reply #3 on: February 20, 2005 - 12:35:54 AM »
    the only source for them I know of is Passon  http://www.passonperformance.com/
     I could trade you trannys but shipping would probably make it redundant
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline kowalski

    • Jr. Member
    • **
    • Posts: 173
    • Challenger=SCCA Trans Am Homologation Special
    Re: A-833 out of a 76-78 Aspen into a 73 small block challenger
    « Reply #4 on: February 20, 2005 - 09:08:04 AM »
    chryco, do u just want to trade tailshaft and mainshaft?  how much do u think shipping would be?
    Logged
    1970 318 bored .060 over edelbrock performer intake ported and polished 360 J heads 2.02 intake 1.60 exhaust double springs carter hi cap fuel pump edelbrock victor series water pump MSD 6AL flotech headers
    Pages: [1]
    « previous next »