Author Topic: How to wire up a mopar performance wiring harness??? (Read 2749 times)

cudamr440 · « **on:** February 03, 2005 - 03:16:21 PM »

I just got a electronic convertion kit from summit part #DCC-3690152 . This harness will convert from points to electronic ignition..
How and what color wires hooks up to what?

??
No directions in the package

MEK-Dangerfield · « **Reply #1 on:** February 03, 2005 - 04:05:05 PM »

If you are asking about the connector that comes out of the electronic control module, I might be able to help you. I'll look this weekend. Someone did that conversion to my 1970 440.

Mike

cudamr440 · « **Reply #2 on:** February 03, 2005 - 04:23:19 PM »

The connector that comes out of the electronic control module. Wire colors are: green with a red stripe, gray with a yellow stripe, black with a yellow stripe(coil I think).
Any info will help
Thanks

Chryco Psycho · « **Reply #3 on:** February 03, 2005 - 11:18:43 PM »

Black with yellow is coil - as you assumed ,
green / red is not used
Grey [really blue] with yellow trace is connected to 12V switched power at the ballast resister & the wire is dark blue , you can solder onto it or scotch lock it

cudamr440 · « **Reply #4 on:** February 04, 2005 - 12:26:43 PM »

Thanks
This info will help alot! :thumbs:

Author Topic: How to wire up a mopar performance wiring harness??? (Read 2749 times)

cudamr440

How to wire up a mopar performance wiring harness???

MEK-Dangerfield

Re: How to wire up a mopar performance wiring harness???

cudamr440

Re: How to wire up a mopar performance wiring harness???

Chryco Psycho

Re: How to wire up a mopar performance wiring harness???

cudamr440

Re: How to wire up a mopar performance wiring harness???