News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Milodon gear drive....water pump won't fit?  (Read 3343 times)

    Offline brads70

    • C-C.com Expert
    • ********
    • Posts: 18747
    Milodon gear drive....water pump won't fit?
    « on: July 27, 2012 - 02:28:47 PM »
    Just about ready to lift the motor/tranny/ k- frame up into place when I decide to bolt on the water pump.
    It doesn't fit? It hits the gear drive about 3/8 before it mates up to the block.?  I did a quick search on Milodons web site and found spacers but there is no picture? part # 13567  Is this what I need? Anyone have some loose so you could measure the thickness? I might make my own?
    Also the bottom pulley doesn't line up with out spacing out the water pump?
    Thanks Brad
    Logged
    Brad
    1970 Challenger 451stroker/4L60 auto OD
    Barrie,Ontario,Canada
    Proud to own one of the best cars ever made!!!!!

    My restoration thread 
    http://www.cuda-challenger.com/cc/index.php?topic=59072.0
     My handling upgrade post
    http://www.cuda-challenger.com/cc/index.php?topic=73985.0


    Offline brads70

    • C-C.com Expert
    • ********
    • Posts: 18747
    Re: Milodon gear drive....water pump won't fit?
    « Reply #1 on: July 27, 2012 - 05:56:44 PM »
    I figured it out on my own and got ambitious and made my own.... spacers are 3/16" ( .187) pulley's line up perfect now. I'm getting sick of having to make parts though.  :-\


    Logged
    Brad
    1970 Challenger 451stroker/4L60 auto OD
    Barrie,Ontario,Canada
    Proud to own one of the best cars ever made!!!!!

    My restoration thread 
    http://www.cuda-challenger.com/cc/index.php?topic=59072.0
     My handling upgrade post
    http://www.cuda-challenger.com/cc/index.php?topic=73985.0

    Offline 72cudamaan

    • Resident
    • *****
    • Posts: 3248
    Re: Milodon gear drive....water pump won't fit?
    « Reply #2 on: July 27, 2012 - 06:34:11 PM »
    At least you can make your own parts. Gotta feel sorry for the guys that can't do that.  Can you just imagine
    going to the machine shop every time something is wrong?  :swear: 
    Logged
    If I cant fix it, it's broke
     
    Andy  (phukker whither)

    Offline brads70

    • C-C.com Expert
    • ********
    • Posts: 18747
    Re: Milodon gear drive....water pump won't fit?
    « Reply #3 on: July 27, 2012 - 07:08:00 PM »
    Quote from: 72cudamaan on July 27, 2012 - 06:34:11 PM
    At least you can make your own parts. Gotta feel sorry for the guys that can't do that.  Can you just imagine
    going to the machine shop every time something is wrong?  :swear:

    Ya your right. Now I'll have to make new spacers for the power steering pump and alternator too.  ::)
    « Last Edit: July 27, 2012 - 09:39:20 PM by brads70 »
    Logged
    Brad
    1970 Challenger 451stroker/4L60 auto OD
    Barrie,Ontario,Canada
    Proud to own one of the best cars ever made!!!!!

    My restoration thread 
    http://www.cuda-challenger.com/cc/index.php?topic=59072.0
     My handling upgrade post
    http://www.cuda-challenger.com/cc/index.php?topic=73985.0

    Offline brads70

    • C-C.com Expert
    • ********
    • Posts: 18747
    Re: Milodon gear drive....water pump won't fit?
    « Reply #4 on: July 27, 2012 - 09:44:30 PM »
     :pullinghair:  Ok last update on this one....
    I assembled it all without a gasket to check clearances and found the water pump was "just" touching. So off it came AGAIN! and I machined .030" off the back of the water pump.  ::)
    So with the gaskets I should be good to go!  :2thumbs: ..... I hope?
    Logged
    Brad
    1970 Challenger 451stroker/4L60 auto OD
    Barrie,Ontario,Canada
    Proud to own one of the best cars ever made!!!!!

    My restoration thread 
    http://www.cuda-challenger.com/cc/index.php?topic=59072.0
     My handling upgrade post
    http://www.cuda-challenger.com/cc/index.php?topic=73985.0

    Offline Moparal

    • Permanent Resident
    • *******
    • Posts: 13085
    Re: Milodon gear drive....water pump won't fit?
    « Reply #5 on: July 27, 2012 - 11:25:24 PM »
    I ran the spacers then used the march pulley set up for the app. I have the stock spacers here for the milodon stuff, but I use a front engine plate now adays
    Logged

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: Milodon gear drive....water pump won't fit?
    « Reply #6 on: July 29, 2012 - 07:39:08 PM »
    If it was easy everyone would be doing it !!
     At least you can make parts easily !!
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline BS CUDA

    • Jr. Member
    • **
    • Posts: 402
    Re: Milodon gear drive....water pump won't fit?
    « Reply #7 on: July 29, 2012 - 08:00:24 PM »
    Quote from: 72cudamaan on July 27, 2012 - 06:34:11 PM
    At least you can make your own parts. Gotta feel sorry for the guys that can't do that.  Can you just imagine
    going to the machine shop every time something is wrong?  :swear:

     That is when you need to get good with a grinder, roloc disc and a file.  :bigsmile:
    Logged

    Offline brads70

    • C-C.com Expert
    • ********
    • Posts: 18747
    Re: Milodon gear drive....water pump won't fit?
    « Reply #8 on: July 29, 2012 - 09:51:05 PM »
    All assembled now!
    Logged
    Brad
    1970 Challenger 451stroker/4L60 auto OD
    Barrie,Ontario,Canada
    Proud to own one of the best cars ever made!!!!!

    My restoration thread 
    http://www.cuda-challenger.com/cc/index.php?topic=59072.0
     My handling upgrade post
    http://www.cuda-challenger.com/cc/index.php?topic=73985.0

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: Milodon gear drive....water pump won't fit?
    « Reply #9 on: July 30, 2012 - 12:39:31 AM »
    Looks awesome  :2thumbs:
    Logged

    Challenger - You`ll wish You Hadn`t
    Pages: [1]
    « previous next »