Author Topic: Lifter noise on start up  (Read 1605 times)

Offline EMCD

  • Full Member
  • ***
  • Posts: 849
Lifter noise on start up
« on: August 04, 2012 - 10:21:56 PM »
When i start my new 408 I get lifter clatter for about 2 seconds before the oil pressure shoots up. Is that normal?




Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Lifter noise on start up
« Reply #1 on: August 04, 2012 - 11:33:12 PM »
usually , the valves that are open when shut off will bleed down so it takes a few seconds for the oil pressure to reach them & pump them back up with hyd cams

Challenger - You`ll wish You Hadn`t

Offline EMCD

  • Full Member
  • ***
  • Posts: 849
Re: Lifter noise on start up
« Reply #2 on: August 05, 2012 - 02:23:11 PM »
Great. So no worries if it clicks for a second of two?

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Lifter noise on start up
« Reply #3 on: August 05, 2012 - 03:19:16 PM »
Nope  :2thumbs:

Challenger - You`ll wish You Hadn`t

Offline EMCD

  • Full Member
  • ***
  • Posts: 849
Re: Lifter noise on start up
« Reply #4 on: August 05, 2012 - 06:54:22 PM »
Great. After my dyno tune, it runs like a champ. My temp problem is now gone. Except for the vapor lock. any suggestions on a vented gas cap?

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Lifter noise on start up
« Reply #5 on: August 05, 2012 - 07:19:23 PM »
Nope , drill a small hole in it LOL

Challenger - You`ll wish You Hadn`t

Offline cameron2502

  • Jr. Member
  • **
  • Posts: 69
Re: Lifter noise on start up
« Reply #6 on: August 05, 2012 - 10:52:56 PM »
my new 408 does the same thing, i thought maybe it was my oil filter was bad letting the oil drain out of it.

Offline EMCD

  • Full Member
  • ***
  • Posts: 849
Re: Lifter noise on start up
« Reply #7 on: August 06, 2012 - 01:39:38 PM »
My engine builder said it was nothing to worry about. However, I'm a trust and verify kind of guy. 

Offline MEK-Dangerfield

  • C-C.com Expert
  • ********
  • Posts: 20946
  • I don't get NO respect! Member since 1/25/2002
Re: Lifter noise on start up
« Reply #8 on: August 06, 2012 - 03:57:36 PM »
I hear the same thing if I don't drive my 2009 Challenger for a couple of days.   :o

Mike

1970 Challenger - SOLD
2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

Offline EMCD

  • Full Member
  • ***
  • Posts: 849
Re: Lifter noise on start up
« Reply #9 on: August 06, 2012 - 07:21:20 PM »
Man, I dig those cars. I hear they may come out with a cuda version in 2014.

Offline dodge freak 2

  • Full Member
  • ***
  • Posts: 825
Re: Lifter noise on start up
« Reply #10 on: August 10, 2012 - 03:07:53 PM »
I run racing 20w-50 oil in the 340 and hear no ticking at all

Offline EMCD

  • Full Member
  • ***
  • Posts: 849
Re: Lifter noise on start up
« Reply #11 on: August 10, 2012 - 03:38:47 PM »
how big of a hole? where should i drill it on the gas cap?

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Lifter noise on start up
« Reply #12 on: August 10, 2012 - 05:11:44 PM »
Chall or Cuda ?

Challenger - You`ll wish You Hadn`t

Offline EMCD

  • Full Member
  • ***
  • Posts: 849
Re: Lifter noise on start up
« Reply #13 on: August 11, 2012 - 02:17:05 PM »
Cuda