Author Topic: wide windshield trim screw  (Read 760 times)

Offline burdar

  • Sr. Resident
  • ******
  • Posts: 5925
wide windshield trim screw
« on: September 11, 2012 - 04:28:56 PM »
There are three holes in the wide stainless trim at the base of the windshield.  Two of those holes are above the wiper pivots.(I have those bolts)  The third hole is over towards the passengers side.  What does the fastener look like that goes there?  I don't see it listed in the fastener guide.  The hole in the window frame is larger then the other ones.   




Offline Jamiez

  • Sr. Member
  • ****
  • Posts: 1981
  • Retro
Re: wide windshield trim screw
« Reply #1 on: September 11, 2012 - 04:42:11 PM »
You mean the hole just to the outside of where the passenger blade attaches to the arm? If so, mine is empty.


Offline burdar

  • Sr. Resident
  • ******
  • Posts: 5925
Re: wide windshield trim screw
« Reply #2 on: September 11, 2012 - 06:07:52 PM »
Yes, that's the spot.  Mine had a fastener there.  The hole is larger then the holes by the wiper pivot.

Offline tommyg29

  • Resident
  • *****
  • Posts: 2706
Re: wide windshield trim screw
« Reply #3 on: September 11, 2012 - 08:05:11 PM »
I do not have a fastener in that hole either, but mine is a cuda
72 Roadrunner 400-4 Auto-3.23 Gear-Black Cruiser
71 Cuda 440-6 Tribute-Limelight-A833 Close Ratio-4 Sp-Pistol Grip-Dana 3.54 Powr Lok-Rally Dash-Shaker (Sold)
92 Dodge Stealth RT-Twin 15g Turbos-SAFC2 Tuned-Mystic Blue-5 Sp-AWD-Rear Wheel Steering-AutoX'r (Sold)
12 Dodge Charger SXT Plus Blacktop Package-3.6L-8 Sp-Leather-Nav (the wife's)

Multiple SRT's, Rams, Dakotas, Caravans and Neons

...the lines on the road just look like dots!....

Offline burdar

  • Sr. Resident
  • ******
  • Posts: 5925
Re: wide windshield trim screw
« Reply #4 on: September 11, 2012 - 09:50:29 PM »
Some had a screw...some didn't.  Those that didn't, had a blob of sealant on the back side.