Source for T/A hood squirters?

[brads70]

Other than the $150 repops, anyone find a car in the junkyard that works?
 I walked around in my local yard for a couple of hours with no luck?

[ChallengerHK]

I take it that TA squirters are different than rallye or flat hood squirters?

[brads70]

I take it that TA squirters are different than rallye or flat hood squirters?

Yes I think I remember Barry saying they are the same as ,or darn close to a 62 Buick or something like that?  I'm not into being perfect so something funtional will work? I might try turning up something on the lathe?

https://www.yearone.com/Product/DisplayProduct/266670

[ChallengerHK]

Yeah, that's a chunk of change. I'd make something too.

[1970 RT Challenger 1970]

WW-1921 1970 Cuda AAR & 1970 Challenger TA Hood Mounted $ 109.95/pr.

http://www.jimsautoparts.com/windshield_wiper_parts.htm

Still pricey.

[brads70]

WW-1921 1970 Cuda AAR & 1970 Challenger TA Hood Mounted $ 109.95/pr.

http://www.jimsautoparts.com/windshield_wiper_parts.htm

Still pricey.

Ya I saw that too thanks!
http://www.fpap.com/proddetail.asp?prod=FPSQ1P

[brads70]

So far I've found these for possible substitutes?
http://www.streetperformance.com/part/mercedes/windshield-washer-nozzle/6422193-107-860-01-47.html
http://www.streetperformance.com/part/oes-genuine/windshield-washer-nozzle/5851267-1809969.html

[Chryco Psycho]

the steel hoods use a metal tube attached to a tab that fits through the grille at the back of the hood , the T/A used a small fitting that sits above the hood with a tube through the hood . A lot of the import cars now use a small button on top of the hood but it would fit on a thin sheet metal hood but not through fiberglass I would think , I would not be spending $100 + to get them !