Author Topic: mallory ignition mark II 28675  (Read 2837 times)

Offline Burpin Chunks

  • Sr. Member
  • ****
  • Posts: 1519
  • http://mikescuda.net/cuda-challenger/burpin_chunks
mallory ignition mark II 28675
« on: February 20, 2005 - 06:11:58 PM »
who can tell me about my ignition. It has a toggle switch that says street and stip. Is this a special ignition and where can I get replacement wires.

mallory ignition mark II 28675




Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: mallory ignition mark II 28675
« Reply #1 on: February 20, 2005 - 11:09:18 PM »
I would contact Mallory on their tech line
 Which wires do you need to replace ?

Challenger - You`ll wish You Hadn`t

Offline Burpin Chunks

  • Sr. Member
  • ****
  • Posts: 1519
  • http://mikescuda.net/cuda-challenger/burpin_chunks
Re: mallory ignition mark II 28675
« Reply #2 on: February 20, 2005 - 11:55:55 PM »
Spark plug wires and d cap and rotor. But Burpin has never seen any like this before. And Burpin was wondering what the switch in the car is for. Burpin has owned it for more than a year and has never really figured out what all the switches do. Burpin just found out this past weekened that it has a fuel got off switch in the car. Burpins son was playing in there and all burpin knew was burpin couldnt start the car. So Burpin found out it was the fuel pump. Then figured it had to be one of those switches the boy was playing with.