power steering for 5.7 ?

Author Topic: power steering for 5.7 ?  (Read 2277 times)

Offline cudadan360

  • Jr. Member
  • **
  • Posts: 91
power steering for 5.7 ?
« on: January 16, 2014 - 09:34:35 PM »
has anyone every tried to make brackets for there factory old style pump to work with the  new hemis? I been looking at it and it doesnt seem to be to bad to do




Offline cudadan360

  • Jr. Member
  • **
  • Posts: 91
Re: power steering for 5.7 ?
« Reply #1 on: January 22, 2014 - 12:44:14 PM »
I know some guys used a GM style pump. But cant find anyone to tell me what yr and model to get it from.. Anyine know? 

Offline Jousi

  • Jr. Member
  • **
  • Posts: 53
Re: power steering for 5.7 ?
« Reply #2 on: January 24, 2014 - 11:41:56 AM »
I have 5.7 hemi 2005, with truck timing cover, and I am using ´80 GM-type 2 pump, installed with hemi pulley. I was using Pontiac Sunbird 1988 pump, cause it had a pipe connection for external reservoir.

Even the threads of the pressure hose was same like in the old mopar one. The bolt holes in the pump just needed to drill a bit bigger, attached with two screws to the timing cover.  And also the pulley "eye" need a bit opening.
BH23G1B TX9 5.7 Hemi+5-speed
JH23J0B FC7 4-speed
BS23R0B TX9 auto

Offline cudadan360

  • Jr. Member
  • **
  • Posts: 91
Re: power steering for 5.7 ?
« Reply #3 on: January 25, 2014 - 10:20:53 AM »
So your not using the sunbird pump  anymore? I thought i had to look for a much newer style pump..

Offline Jousi

  • Jr. Member
  • **
  • Posts: 53
Re: power steering for 5.7 ?
« Reply #4 on: January 25, 2014 - 11:51:35 AM »
My bad, I am still using it, or at least next spring when the snow is melting  :bigshades:
If you go this route, you have to buy pulley installer tool also, but it is only around 20 USD
BH23G1B TX9 5.7 Hemi+5-speed
JH23J0B FC7 4-speed
BS23R0B TX9 auto

Offline moparman82

  • MOPAR or No car
  • Resident
  • *****
  • Posts: 2834
  • Livin' the dream
Re: power steering for 5.7 ?
« Reply #5 on: January 25, 2014 - 02:22:06 PM »
Do you have a pic of your setup jousi?
Scott in Omaha
Searching for the right 70 Cuda driver
1973 challenger in go-mango, on it's way to a 70 T/A clone SOLD
2015 crew cab Hemi ram SOLD
2019 Ram Laramie
2016 Tahoe LTZ SOLD
1976 Ramcharger 383 4spd SOLD
2016 Audi

24 mopars past and 2 present

Offline cudadan360

  • Jr. Member
  • **
  • Posts: 91
Re: power steering for 5.7 ?
« Reply #6 on: January 25, 2014 - 06:20:37 PM »
If like to see a pic too haha

Offline Jousi

  • Jr. Member
  • **
  • Posts: 53
Re: power steering for 5.7 ?
« Reply #7 on: January 25, 2014 - 10:19:58 PM »
Sorry, I dont have any pics from time of installation, but I can take couple from engine room later on the week when I arrive home.
BH23G1B TX9 5.7 Hemi+5-speed
JH23J0B FC7 4-speed
BS23R0B TX9 auto

Offline cudadan360

  • Jr. Member
  • **
  • Posts: 91
Re: power steering for 5.7 ?
« Reply #8 on: January 25, 2014 - 11:24:26 PM »
Awesome that would be great.. I found a ppump. Just need to find the reservoir

Offline Jousi

  • Jr. Member
  • **
  • Posts: 53
Re: power steering for 5.7 ?
« Reply #9 on: January 29, 2014 - 07:50:02 AM »
Here is couple pics, if there is something to see :) I am using ZF plastic reservoir at attached to the battery tray, very common in junkyards here in the Europe.

http://s1293.photobucket.com/user/Jousi2/media/jan14009_zps92dbd659.jpg.html

http://s1293.photobucket.com/user/Jousi2/media/jan14010_zps1a3911c4.jpg.html

« Last Edit: January 29, 2014 - 12:47:53 PM by Jousi »
BH23G1B TX9 5.7 Hemi+5-speed
JH23J0B FC7 4-speed
BS23R0B TX9 auto

Offline cudadan360

  • Jr. Member
  • **
  • Posts: 91
Re: power steering for 5.7 ?
« Reply #10 on: January 29, 2014 - 01:13:58 PM »
wow nice,, dont think ive seen a set up like that