News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Drive shaft length?  (Read 1484 times)

    Offline 41husk

    • Full Member
    • ***
    • Posts: 605
    Drive shaft length?
    « on: October 26, 2005 - 07:33:50 AM »
    I have a 70 Challenger that had a 318/904 with an 8 1/4 rear.  I put in a 340/904 ( no difference) and a 8 3/4 rear.  My old shaft was 4' 5 3/8" long - the yoke and is about an inch too long?  Is the pumpkin longer on the 8 3/4 or should this drive shaft work?  The shaft on the yoke is all the way in and it sure came out much easier.
    Logged
    1969 Dodge Charger Daytona Clone 440/727
    1970 Dodge Challenger Convertible 340/727
    1977 Dodge D-700 Car Hauler 361/5spd
    2009 Dodge Challenger SRT8 6.1/auto


    Offline 41husk

    • Full Member
    • ***
    • Posts: 605
    Re: Drive shaft length?
    « Reply #1 on: October 26, 2005 - 07:35:38 AM »
    Sorry Chryco, jusr read your post a few threads down.  Thanks for the info.
    Logged
    1969 Dodge Charger Daytona Clone 440/727
    1970 Dodge Challenger Convertible 340/727
    1977 Dodge D-700 Car Hauler 361/5spd
    2009 Dodge Challenger SRT8 6.1/auto

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: Drive shaft length?
    « Reply #2 on: October 26, 2005 - 11:17:42 AM »
    yes the ront of the 8 3/4 diff is longer so the driveshaft needs to be shortened
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline dst

    • Jr. Member
    • **
    • Posts: 26
    • Negated Identity Construct
    Re: Drive shaft length?
    « Reply #3 on: November 11, 2005 - 09:00:58 PM »
    I cut my drive shaft. No problem.
    Logged
    There are those who have fallen and those who are going to fall.
    Pages: [1]
    « previous next »