News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Rear Window centering clips  (Read 803 times)

    Offline peterro

    • Full Member
    • ***
    • Posts: 713
    • 70 Challenger in progress...
      • The Pistonhead
    Rear Window centering clips
    « on: June 18, 2012 - 12:43:54 AM »
    Just installed all the trim clips and put the centering clips in at the lower corners like the picture below. Wanted to make sure this is correct before I make the call to have the glass installed. Is this clip in the right place oriented correctly? Haven't seen any pictures and only a few references.

    Thanks.

    Logged


    Offline 67vertman

    • Sr. Resident
    • ******
    • Posts: 5125
    • Member since 9-23-2005
    Re: Rear Window centering clips
    « Reply #1 on: June 18, 2012 - 11:35:43 AM »
    They look good peterro.  Remeber, they were placed by line workers so they didn't measure anything.
    Logged



    Ron - Born and raised in Southern California

    I got the 1970 Cuda, but still need the hot blonde to ride shotgun!

    First car -1969 Road Runner 383 4sp

    Current ride - 1970 Barracuda 440-6 4 sp Dana 60  (4:10)

    Offline publicbottle

    • Jr. Member
    • **
    • Posts: 107
    Re: Rear Window centering clips
    « Reply #2 on: January 07, 2013 - 04:52:50 PM »
    Hi, I know this is an old post however I would like to know if the clips do the same function as the small rubber blocks?
    I have the rubber blocks, but not the clips......and for some reason or another I thought the rubber blocks where to go on the front windshield?

    Thanks for the help!! :1zhelp:
    Logged

    Offline 72cudamaan

    • Resident
    • *****
    • Posts: 3248
    Re: Rear Window centering clips
    « Reply #3 on: January 08, 2013 - 01:35:24 PM »
    Quote from: publicbottle on January 07, 2013 - 04:52:50 PM
    Hi, I know this is an old post however I would like to know if the clips do the same function as the small rubber blocks?
    I have the rubber blocks, but not the clips......and for some reason or another I thought the rubber blocks where to go on the front windshield?

    Thanks for the help!! :1zhelp:

    Same function! Yes the blocks normally go on the front and many people don't even is the metal clips
    on the back. Just some sort of spacer, though I would personally use the clips.Just easier IMO.
    Logged
    If I cant fix it, it's broke
     
    Andy  (phukker whither)
    Pages: [1]
    « previous next »