SmallBlock OverDrive A833 4-Speed Bellhousing

[getslideways]

Looking for a bellhousing to accept the larger bearing retainer of the overdrive A833 4 speed and mate it to a 318 Smallblock.  If you have something and are willing to ship to WA, please feel free to shoot me a PM.  Thank you!

[getslideways]

[brads70]

Could you just machine yours to fit?

[getslideways]

Could you just machine yours to fit?

Correct, the earlier ones can also be machined, however i need one either way, as i currently dont have a bellhousing to use.  So if i could get one thats ready to bolt up and go, that would be ideal.  However if one doesnt turn up, i'll most likely end up going the machining route.

[getslideways]

[John A]

I should have one, I will check and get back to you. John.

[John A]

I found the bell housing, it is an NOS part, part # 3743859. If you need pictures pm me your e mail address. John.

[crocha617]

I found the bell housing, it is an NOS part, part # 3743859. If you need pictures pm me your e mail address. John.

John are you from rhode island?

[John A]

Hi Chris, I live in Connecticut, I bought a 4 speed trans from you a couple of years ago. John.

[crocha617]

Yes I remember now I met you at Ikea outside of New Haven I think.

[ShelbyDogg]

You should have your Overdrive front bearing retained turned down to 4.80" too and have your bell housing opened up to accept it. This way, it will fit behind a big block bell when you decide to convert it later.