E-body 22" radiator installation... update - Mar. 21

[BIGSHCLUNK]

Going along with Niel's comment, I'm running Schumaker mounts ( just for comparison)

[hemi68charger]

what engine mounts are you using ? the engine could be sitting high .
 I have the same factory set up in my car , 22" rad , upper hose is left [drivers] side .
clutch fan looks right to me although the Jag clutch is a bit shorter if that helps , I use the jag clutch in B bodies before 70 .
 It looks more bent to me , the sides seem to have a lot of clearance so the top should not be that close .

They are OEM insulators. I'm assuming Hoss got them from the local parts store. I'm going to put everything back to the way it is suppose to go before I make any more adjustments or conclusions. (fan/spacer/shroud/rad.)

Thanks for the reply...

[hemi68charger]

Hey guys, this look ok? Got the fan and spacer in and threw it together prior to detailing... I have seen two different spacer thicknesses. I have the thinner one on. With the thick one, the tip of the fan seems rather close to the shroud on the topside....

[BIGSHCLUNK]

  much better