News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: pinion bearings  (Read 612 times)

    Offline mopar jack

    • Full Member
    • ***
    • Posts: 566
    pinion bearings
    « on: May 11, 2013 - 10:29:55 AM »
    I have a 742 case with 2.94 gears that I want to replace the bearings on. If I change the pinion bearings do I have to check or reset the pinion depth or can I reuse the spacers and install it?
    Logged


    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: pinion bearings
    « Reply #1 on: May 11, 2013 - 11:33:47 AM »
    While the brgs "should" be exacttly the same they won't be , you need to recheck the depth unfortunatly
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline mopar jack

    • Full Member
    • ***
    • Posts: 566
    Re: pinion bearings
    « Reply #2 on: May 11, 2013 - 11:57:55 AM »
    Thanks Chryco. I know how to set the carrier bearings for preload and backlash but I have never done the pinion before and I think you need a special arbour tool to set it. Maybe I'll send it to a shop and have it done.
    Logged

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: pinion bearings
    « Reply #3 on: May 12, 2013 - 12:42:48 AM »
    ypu can try it with the same shims & check the pattern on the gears , it may work out OK , if not have the pinion depth corrected
    Logged

    Challenger - You`ll wish You Hadn`t
    Pages: [1]
    « previous next »