Author Topic: Reversed Cables on Jump Start - No Ralley Gauges  (Read 1283 times)

Offline 70redchallenger

  • Newbie
  • *
  • Posts: 2
Reversed Cables on Jump Start - No Ralley Gauges
« on: May 13, 2013 - 06:10:29 PM »
Rough day.  Body shop drained battery on my 70 Dodge Challenger and proceeded to apply booster cables to start.  Problem is they installed the cables in reverse order.  Obvious problem was the blown fusible link.  Replaced the fusible link and vehicle now runs.  The fuel gauge, oil pressure gauge and temperature gauge are not working.  I am not sure where to start.  Any suggestions out there?  I have reviewed a few other posts but sense my problem today is a bit different than anything else out there already answered and I am reluctant to start tearing things apart if there is a simple solution.  Thanks for any responses.

Michael D.
Bismarck, ND

70 Dodge Challenger
383 Automatic




Offline JayBee

  • Resident
  • *****
  • Posts: 2477
Re: Reversed Cables on Jump Start - No Ralley Gauges
« Reply #1 on: May 13, 2013 - 07:15:34 PM »
Odds are the 5 volt limiter on the back of the gauges is fried. It converts the car's 12v to 5v for those 3 gauges. It's the only thing that is common to all 3.

http://www.ebay.com/itm/Solid-State-Mopar-Limiter-IVR3-bolt-on-Challenger-Cuda-B-body-Rallye-/380599172049?pt=Vintage_Car_Truck_Parts_Accessories&hash=item589d7a7bd1&vxp=mtr#ht_354wt_679
John

1970 Barracuda convertible
2014 Toyota Avalon

Offline 72cudamaan

  • Resident
  • *****
  • Posts: 3248
Re: Reversed Cables on Jump Start - No Ralley Gauges
« Reply #2 on: May 13, 2013 - 09:07:11 PM »
Odds are the 5 volt limiter on the back of the gauges is fried. It converts the car's 12v to 5v for those 3 gauges. It's the only thing that is common to all 3.

http://www.ebay.com/itm/Solid-State-Mopar-Limiter-IVR3-bolt-on-Challenger-Cuda-B-body-Rallye-/380599172049?pt=Vintage_Car_Truck_Parts_Accessories&hash=item589d7a7bd1&vxp=mtr#ht_354wt_679


 :iagree:
If I cant fix it, it's broke
 
Andy  (phukker whither)

Offline Skunkworks Challenger

  • Full Member
  • ***
  • Posts: 781
  • Mopars forever!
Re: Reversed Cables on Jump Start - No Ralley Gauges
« Reply #3 on: May 13, 2013 - 09:13:49 PM »
Bummer!  I expect the diode in your alternator got fried as well.
The Brewmaster

Offline moparelwood

  • Jr. Member
  • **
  • Posts: 71
Re: Reversed Cables on Jump Start - No Ralley Gauges
« Reply #4 on: May 14, 2013 - 12:22:14 AM »
Odds are the 5 volt limiter on the back of the gauges is fried. It converts the car's 12v to 5v for those 3 gauges. It's the only thing that is common to all 3.

http://www.ebay.com/itm/Solid-State-Mopar-Limiter-IVR3-bolt-on-Challenger-Cuda-B-body-Rallye-/380599172049?pt=Vintage_Car_Truck_Parts_Accessories&hash=item589d7a7bd1&vxp=mtr#ht_354wt_679

 :iagree:  Check out this link for some very good info on the voltage regulator
http://www.allpar.com/history/mopar/electrical2.html
Good luck

Offline dodj

  • Sr. Resident
  • ******
  • Posts: 6197
Re: Reversed Cables on Jump Start - No Ralley Gauges
« Reply #5 on: May 14, 2013 - 08:48:34 AM »
Odds are the 5 volt limiter on the back of the gauges is fried. It converts the car's 12v to 5v for those 3 gauges. It's the only thing that is common to all 3.
I agree, probably regulator, but reversing the polarity on a bimetal strip shouldn't be a big deal, at least I wouldn't have thought it would be a big deal. Evidence suggests otherwise though.. unless of course it was replaced with an electronic one already.
Scott
1973 Challenger  440 4 spd 
2007.5 3500 6.7 Cummins Diesel, Anarchy tuned.
Good friends don't let friends do stupid things. ........alone.

Offline 70redchallenger

  • Newbie
  • *
  • Posts: 2
Re: Reversed Cables on Jump Start - No Ralley Gauges
« Reply #6 on: May 14, 2013 - 09:33:45 AM »
Great suggestions.  Seems like the way to go is replace the limiter on the back side of the gauges.  Thanks for the suggestions and pointers to ebay.  Will be back in a few days with the results.

Mike D.

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Reversed Cables on Jump Start - No Ralley Gauges
« Reply #7 on: May 15, 2013 - 01:58:07 AM »
I would be thinking about moving the whole car out of their shop , not too bright !!

Challenger - You`ll wish You Hadn`t