69 barracuda guage problem. HELP!

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: 69 barracuda guage problem. HELP!  (Read 2450 times)

    Offline Lee72

    • Newbie
    • *
    • Posts: 2
    69 barracuda guage problem. HELP!
    « on: April 07, 2005 - 06:04:13 AM »
       Repairing some damaged and missing wiring for a friend in a 69 barracuda. The power feed for the guages was cut and missing along with some others. Got everything repaired  and working. The guages read incorrect. New sending units since the old ones would not read. Now the oil pressure maxes out as soon as it gets pressure. Temp does the same as soon as the engine begins to warm up. Double checked the application and I did install the senders for guages not lights. My question is this. Is this car supposed to have a instrument cluster regulator? Our parts catalogs at work do not show one for this year cuda. It seems to skip a few years around 68 to 70. I have one for a 70 or 71 but can not figure out where it belongs since the wiring pigtails were cut off of some connectors at the cluster. I assume that it would go inline on the guage power feed. Does the base need to be grounded? Where is it mounted on  the back of the cluster? I really could use some help from some Mopar guys. I know just about all if not all chryslers used these regulators. Thank you.Lenox273@yahoo.com
    Logged


    Offline OUTLAW

    • MASTER OF ALL THINGS MOPAR
    • Sr. Member
    • ****
    • Posts: 1002
    • I didn't say you can't RACE--I said you can't WIN
      • MOPAR-MADNESS WEB/FORUM
    Re: 69 barracuda guage problem. HELP!
    « Reply #1 on: April 07, 2005 - 06:21:06 AM »
    go here I have several cuda wiring diagrams there for people to use
    here is one too

    http://sybertek.us/moparsa2e/viewtopic.php?t=224

    seems to me when I wasdoing my 68 there was a voltage stabilizer for the fuel and temp guage ...dont remember one for the oil pressure but may have been
    « Last Edit: April 07, 2005 - 06:23:37 AM by OUTLAW »
    Logged

    Offline 71 DEPUTY

    • Full Member
    • ***
    • Posts: 727
    • IF YOU CAN'T DODGE IT--RAM IT!
      • Cardomain
    Re: 69 barracuda guage problem. HELP!
    « Reply #2 on: April 07, 2005 - 08:08:04 AM »
    YES- ALL GAUGES  require a voltage reg.!
    Logged

    Offline MEK-Dangerfield

    • C-C.com Expert
    • ********
    • Posts: 20946
    • I don't get NO respect! Member since 1/25/2002
    Re: 69 barracuda guage problem. HELP!
    « Reply #3 on: April 07, 2005 - 09:44:05 AM »
    Yeah Guys,
      It sounds like that voltage regulator/limiter may be crapped out. Too much juice to the goose.  :madvibe:

      Mike
    Logged

    Mike

    1970 Challenger - SOLD
    2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: 69 barracuda guage problem. HELP!
    « Reply #4 on: April 08, 2005 - 12:45:39 AM »
    Quote from: 71 DEPUTY on April 07, 2005 - 08:08:04 AM
    YES- ALL GAUGES  require a voltage reg.!

    except the ammeter
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline Lee72

    • Newbie
    • *
    • Posts: 2
    Re: 69 barracuda guage problem. HELP!
    « Reply #5 on: April 08, 2005 - 05:45:51 AM »
       Thanks guys. I figured it needed one. Now, where does it mount on the back of the cluster and what is it connected to? I realize it goes inline on the power supply side, but where after that? I have seen in my search for answers that the fuel guage may have a regulator built in to it. Anyone got a pic of their cluster or a spare one? Again, thank you.
    Logged

    Offline 71 DEPUTY

    • Full Member
    • ***
    • Posts: 727
    • IF YOU CAN'T DODGE IT--RAM IT!
      • Cardomain
    Re: 69 barracuda guage problem. HELP!
    « Reply #6 on: April 08, 2005 - 06:19:21 AM »
    here you are- make sure the case is grounded to the frame of the dash
    Logged
    Pages: [1]
    « previous next »