proportiong valve location?

[71 DEPUTY]

since this was missing when i bought the car- I need the location of it- a picture of it would be of greatest help.

have one now for the car but can't seem to find the holes to line up.
it has a bolt and 3/4" away is a tab.

power steering, power booster, 4 speed clutch

thanks
john

[BIG MIKE]

i can get more if need

[71 DEPUTY]

in that location it would look like my power steering unit would not allow it to be there. if you do have others, that would help

thanks bigmike!!

[BIG MIKE]

i'll get some tomarrow, mine has power steering also.

[71 DEPUTY]

THANKS BIG MIKE!!!!

[BIG MIKE]

if this don't help tell how you would like the picture taken and i'll have it for you the next day.

[71 DEPUTY]

with all the stuff around it , it is hard to see exactly where is is located- lol lol

tell me if it is on the frame or on the innear fender.
how far in front of the master booster, how far up from the frame rail.  this should help me!

thanks again!!!!!!

[BIG MIKE]

i'll try to measure it for you monday, the refrigerator went out and the washer is leaking. i tell you when they go they all go

[71 DEPUTY]

thanks- need to keep that CAM2 nice and cold!!!!!

[PISTOL GRIP]

it is on the inner fender, below the master cyl.

[BIG MIKE]

i hope it helps............
from the front of the booster to valve is about 1/2"
from the top of the frame to bolt is 6"
from the friewall to th bolt is 8"
bolted to the inner fender.

i made up a picture but ross is still working out the bugs so i'll post it when i can. i just put the measurements on the first pic.

[71 DEPUTY]

thanks BIG MIKE-  the measurements helped alot.

the unit I have has the bolt in it but the little tab below it doesn't fit in the hole below the bolt hole on the innear fender- but!! looking closely I can see a impression on the fender for the tab!!! looks like the factory didn't drill it out!!!  thanks again!!!!!!!!!!

JOHN MAC

[BIG MIKE]

glad it help you out