Author Topic: leaf springs shackle  (Read 607 times)

Offline acudadude

  • Jr. Member
  • **
  • Posts: 227
leaf springs shackle
« on: May 31, 2013 - 12:11:28 PM »
Whats the best way to remove the leaf spring shackle or do they make a tool for the job?




Offline burdar

  • Sr. Resident
  • ******
  • Posts: 5925
Re: leaf springs shackle
« Reply #1 on: May 31, 2013 - 12:33:16 PM »
After taking the inside piece off they just pull out.  The shackle pins could be all rusted up inside the bushings though.  That would make them harder to remove.

With the back of the car on jack stands(supported at the frame) you can jack up the rear end housing to take the load off the shackle.

Offline acudadude

  • Jr. Member
  • **
  • Posts: 227
Re: leaf springs shackle
« Reply #2 on: June 02, 2013 - 12:55:46 PM »
THANKS burdar, Forgot to ask whats the extra bolt thats in the frame rail used for see pix

Offline burdar

  • Sr. Resident
  • ******
  • Posts: 5925
Re: leaf springs shackle
« Reply #3 on: June 02, 2013 - 01:57:29 PM »
There is a bracket that's supposed to be there.  It goes from the frame rail to the bumper guard.

Offline acudadude

  • Jr. Member
  • **
  • Posts: 227
Re: leaf springs shackle
« Reply #4 on: June 06, 2013 - 02:18:43 PM »
Got them off with my friendly sawzall. I got new stock ones with rubber bushings do you use any grease or lube when putting them on??? Thks

Offline dodj

  • Sr. Resident
  • ******
  • Posts: 6197
Re: leaf springs shackle
« Reply #5 on: June 06, 2013 - 03:32:10 PM »
No oil or grease.
Scott
1973 Challenger  440 4 spd 
2007.5 3500 6.7 Cummins Diesel, Anarchy tuned.
Good friends don't let friends do stupid things. ........alone.