Author Topic: Weld EVO "5" 17x9.5 and 17x8 Wheels with BFG tires  (Read 915 times)

Offline ntstlgl1970

  • Resident
  • *****
  • Posts: 2204
  • T a c o c a t
Weld EVO "5" 17x9.5 and 17x8 Wheels with BFG tires
« on: June 16, 2013 - 02:34:26 PM »
Had these on my car for a number of years with about 7k miles on them.


SOLD!


No curb rash, no patches or plugs in tires. A couple of wheels have minor scratches here and there. I bought these new.

There are a total of 5 wheels (2 17x8 and 3 17x9,5), front (1") and rear (3/4") wheel spacers, one spare short center cap and one spare tall center cap. Front tires are BFG T/A 245/45R17, rears are BFG T/A 305/45R17. The spare wheel has a Falken Zeix 275/40R17 on it. Front wheel backspacing is ~5.375, rear is ~6.900. Front tires are 25.5" tall, rear 28". Front tires have about 10/32nds tread left on them, the rears have about 8/32nds left. The spare tire has never been driven on and has about 10/32nds.

My car has stock suspension in the front and a stock width E body rear with the MP offset leaf spring hangers and longer wheel studs.

$1000 OBO - located in Sacramento, CA. I will have these at the Capital City Mopars show this Saturday

ntstlgl1970@yahoo.com

« Last Edit: June 24, 2013 - 04:33:04 PM by ntstlgl1970 »
70 Cuda, 7.0L Gen-III Hemi, Viper T56 w/9310 gearset, 3.91's, Megasquirt MS3x v3.57, Innovate wideband, Firm Feel upper arms, torsion bars, springs and strut rods, QA1 DA shocks. I did everything on this car except the fancy paint stuff and I drive it...and I can't seem to stop messing with it....