News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: More vibration, noise issues  (Read 599 times)

    Offline mikeljAAR

    • Jr. Member
    • **
    • Posts: 122
    More vibration, noise issues
    « on: June 18, 2013 - 09:28:12 AM »
    My recently restored, total stock configuration AAR has an annoying whine when under load at lower speeds, and a vibration above 65 mph through the console area.  All driveline parts are new, and it does it no matter which sets of wheels and tires I use. Any suggestions?
    Logged
    "I don't always downshift, but when I do it is near a Prius so they can hear me hurting the environment"


    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: More vibration, noise issues
    « Reply #1 on: June 18, 2013 - 09:36:37 AM »
    probably driveline angle again , must be a problem in the trans creating the whine
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline mikeljAAR

    • Jr. Member
    • **
    • Posts: 122
    Re: More vibration, noise issues
    « Reply #2 on: June 18, 2013 - 11:21:24 AM »
    Thanks, that angle must be a commonly messed up item when these cars are redone, you wonder why so many get it wrong.  I have an auto, which is what makes the whine more interesting, I will try different gears and see if it is affected, thanks!
    Logged
    "I don't always downshift, but when I do it is near a Prius so they can hear me hurting the environment"

    Offline cudabob496

    • Sr. Resident
    • ******
    • Posts: 8024
    Re: More vibration, noise issues
    « Reply #3 on: June 19, 2013 - 01:09:18 AM »
    buying a high quality well balance drive shaft can help a lot.


    These guys sold me a nice one:

    http://www.dennysdriveshaft.com/


    a local guy balanced my old one, but the new one from Denny's is a lot smoother at high speed/rpms.
    Plus, its a lot stronger.
    « Last Edit: June 19, 2013 - 01:11:17 AM by cudabob496 »
    Logged
    72 Cuda, owned 25 years. 496, with ported Stage VI heads, .625 in solid roller, 254/258 at .050, 3500 stall, 3.91 rear. 850 Holley DP, Reverse manual valve body.

    1999 Trans Am, LS1, heads, cam, headers, stall, etc! Love to surprise the rice rockets with this one. They seem so confident, then it's "what the heck just happened?"

    2011 Kawasaki Z1000
    Pages: [1]
    « previous next »