Author Topic: A833 output shaft (Read 1239 times)

dodj · « **on:** June 24, 2013 - 03:34:53 PM »

Did the 833 have output shafts with different spline counts? Or are they all the same?

Chryco Psycho · « **Reply #1 on:** June 24, 2013 - 03:39:07 PM »

4 different ones I am aware of
A body length & the B/E/truck longer version
Regular 4 spd &
Od which uses a smaller diameter where 3rd gears rides on the shaft . , to my knowledge the B/E/T trans all use the same slip yolk & syncro splines

dodj · « **Reply #2 on:** June 24, 2013 - 11:24:57 PM »

Quote from: Chryco Psycho on June 24, 2013 - 03:39:07 PM

to my knowledge the B/E/T trans all use the same slip yolk & syncro splines

The reason I ask is Denny's driveshafts talks about two different spline counts for mopar, 26 and 30, for the 904, 727, and 833. guess I got to go count, not sure which the 833 has.

Chryco Psycho · « **Reply #3 on:** June 24, 2013 - 11:34:46 PM »

the 904 & some of the 833 a bocy trans have a smaller slip yolk

dodj · « **Reply #4 on:** June 25, 2013 - 02:08:21 PM »

So it's probably a 30. I'll count and make sure i guess.

Chryco Psycho · « **Reply #5 on:** June 26, 2013 - 09:25:39 AM »

I have yet to see a long shaft B/E/T trans with the small spline

Author Topic: A833 output shaft (Read 1239 times)

dodj

A833 output shaft

Chryco Psycho

Re: A833 output shaft

dodj

Re: A833 output shaft

Chryco Psycho

Re: A833 output shaft

dodj

Re: A833 output shaft

Chryco Psycho

Re: A833 output shaft