News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: 70 Challenger  (Read 750 times)

    Offline mer5044

    • Jr. Member
    • **
    • Posts: 30
    70 Challenger
    « on: July 02, 2013 - 05:58:37 PM »
    Are there different axle brgs for a 7.25 rear end ? Car has a 318ci motor. Been to 5 different parts store ans all list RWF34-R as the only brg but the ID is too small 1.325. axle dia. is 1.435 any help out there?? Old brgs were removed and are long gone!
    Logged


    Offline PlumCraZRT

    • Full Member
    • ***
    • Posts: 631
      • My Challenger's Crappy Website
    Re: 70 Challenger
    « Reply #1 on: July 03, 2013 - 03:11:21 PM »
    Quote from: mer5044 on July 02, 2013 - 05:58:37 PM
    Are there different axle brgs for a 7.25 rear end ? Car has a 318ci motor. Been to 5 different parts store ans all list RWF34-R as the only brg but the ID is too small 1.325. axle dia. is 1.435 any help out there?? Old brgs were removed and are long gone!

    Are you sure you have a 7.25" rear?
    Logged
    mmmmm.... Mopar.... *drool*

    Offline HemiOrange70

    • Resident
    • *****
    • Posts: 2062
    Re: 70 Challenger
    « Reply #2 on: July 03, 2013 - 04:09:31 PM »
    early 70 318 Challengers had  that rear end. I would change it out ASAP
    Logged

    Offline mer5044

    • Jr. Member
    • **
    • Posts: 30
    Re: 70 Challenger
    « Reply #3 on: July 03, 2013 - 05:32:10 PM »
    This is a rare special order vehicle-- doing concours restore.This is diffenitely a7.25 rear & is the original.
    Logged

    Offline mer5044

    • Jr. Member
    • **
    • Posts: 30
    Re: 70 Challenger
    « Reply #4 on: July 05, 2013 - 12:58:58 PM »
    Just talked to DTS & it appears that the after market parts suppliers can't read their books. I now have correct part number -RWC35YYR-& it IS the only one for my diferential. Can't trust anybody !
    Logged
    Pages: [1]
    « previous next »