Does anyone have any pictures showing how the horn is assembled on a crush can column on a Challenger?
I am starting with a column that had no crush can and had a Grant wheel on it. The wheel was up against the dash pad lip and had no horn connected. PO used a separate button on the bottom of the dash.
I installed a crush can and have a Tuff Wheel look alike on order which is drilled for the Mopar can as well as the standard Grant pattern.
I ordered a horn button retainer and a Tuff Wheel horn button contact assembly.
I am wondering what else I need plus how it all goes together.
A picture might be worth a few words