Author Topic: dr diff relocation kit (Read 1715 times)

chuck · « **on:** August 04, 2013 - 09:38:51 PM »

what all needs to be done to install this leaf spring relocation kit pics would be great to thanks

brads70 · « **Reply #1 on:** August 04, 2013 - 09:48:34 PM »

Which kit? I assume it's the 1" kit? I have that one so you can bolt in the b-Body rear end?
http://www.doctordiff.com/e-body-offset-spring-hanger-shackle-kit.html
It's a easy bolt in, make sure Cass knows what size the hole is in your bushings so he gets you the correct steel bushings?
I bought a complete dana 60 ( b body width) and spring relocation kit for my challenger from Cass. Went in real easy!

mr_340 · « **Reply #2 on:** August 06, 2013 - 07:08:56 PM »

If you have stock fuel & brake lines you might have to massage them a bit. Moved my springs in 3/4" and they were very close. i have pics but too large to post.

chuck · « **Reply #3 on:** August 06, 2013 - 08:51:07 PM »

Pics would be great

Katfish · « **Reply #4 on:** August 06, 2013 - 10:36:05 PM »

What kind of car? If you have a Challenger with cut outs in the valance, you may need to trim the bracing.
Not needed on the non-cut out valance.

Katfish · « **Reply #5 on:** August 06, 2013 - 10:40:55 PM »

mr_340 · « **Reply #6 on:** August 08, 2013 - 05:39:42 PM »

I have pics if someone can downsize them or pm me your e-mail and I'll send em to ya.
Gary
I think i got it.

mr_340 · « **Reply #7 on:** August 09, 2013 - 11:04:23 AM »

One more. I only moved mine in 3/4".

chuck · « **Reply #8 on:** August 11, 2013 - 07:43:57 PM »

Thanks guys my car is a 70 cuda with Dana 60

Author Topic: dr diff relocation kit (Read 1715 times)

chuck

dr diff relocation kit

brads70

Re: dr diff relocation kit

mr_340

Re: dr diff relocation kit

chuck

Re: dr diff relocation kit

Katfish

Re: dr diff relocation kit

Katfish

Re: dr diff relocation kit

mr_340

Re: dr diff relocation kit

mr_340

Re: dr diff relocation kit

chuck

Re: dr diff relocation kit