News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: a/c question!  (Read 1408 times)

    Offline Mr. 6pak2go

    • Resident
    • *****
    • Posts: 2266
    • Restore it dont crush it!
    a/c question!
    « on: March 30, 2005 - 07:42:33 PM »
    Hey I gotta a/c question I hooked up my a/c compresser today (put a belt on it) and the compresser turns freely nor smoke or noises but the cluth want engage is the cluth bad or do i need a new compresser?? thanks!  :beer:
    Logged
    My family, My cars, My guns three things il fight for!!


    Offline purple1

    • Sr. Member
    • ****
    • Posts: 1820
    • Worlds first e-body trailer. Member since 3/10/05
    Re: a/c question!
    « Reply #1 on: March 30, 2005 - 08:26:15 PM »
    Check to make sure there is 12 volts at the compressor.
    It might not be getting voltage to the clutch.

    If it is low on charge it will not engage the clutch.
    There is a low pres. switch on the dryer.
    Logged

    Dave


    Worlds first e-body trailer.    Severna Park, Maryland

    Offline Mr. 6pak2go

    • Resident
    • *****
    • Posts: 2266
    • Restore it dont crush it!
    Re: a/c question!
    « Reply #2 on: March 31, 2005 - 07:46:29 PM »
    thanks
    Logged
    My family, My cars, My guns three things il fight for!!

    Plum6Pak

    • Guest
    Re: a/c question!
    « Reply #3 on: March 31, 2005 - 08:04:16 PM »
    You could also run a jumper to it and see if it engages without the engine running, it should pull in each time you make contact with the wire. If not, may have a bad winding. Hope you get it going!
    Logged

    Offline Mr. 6pak2go

    • Resident
    • *****
    • Posts: 2266
    • Restore it dont crush it!
    Re: a/c question!
    « Reply #4 on: April 01, 2005 - 06:52:27 PM »
    il try that thanks man!!  :beer:
    Logged
    My family, My cars, My guns three things il fight for!!
    Pages: [1]
    « previous next »