MSD 6013 AND VOLTAGE REGULATOR

[GCCUDA]

ANYONE KNOW WHAT VOLTAGE REGULATOR SHOULD BE USED WITH THE MSD PART# 6013 AND RUNNING A CARB SETUP ON A 6.1 HEMI?

[Travis72]

On my 6.1 setup, I just used a stock 5.7/6.1 alternator and a stock 1972 Mopar electronic voltage regulator.  Be sure your wiring is beefed up to handle all the additional current, in particular if you're using a stock dash you'll want to bypass the ammeter.

Travis
72 Cuda

[GCCUDA]

Hey Travis. Thanks for the imput . Are you using a tach . if so how did you wire it?
John

[Travis72]

I'm running a FAST XFI system which has a tach output wire that I ran directly to my tach.  I would imagine the MSD system has either a tach output or an adapter harness that supplies the tach output.

Travis
72 Cuda

[GCCUDA]

im using the msd 6013 and their wire harness , also going carb set up.  should I eliminate the resistor?