tti exhaust and changing the reverse rod linkage

[Chlngrcrzy]

I made my 73 rod look like a 70/71 no big deal just need a welder and hacksaw. Had to do the same with my Ppasson 5 spd setup as well. It came with a reverse rod like a 73.

That was what i was thinking. From what i could see, it looked like it had a different bend to it. So why not heat it up and bend it?

[73EStroker]

You will find you have to cut it and weld as that bend straightened out leaves too much length that will hang down too far