Wanted Complete 70 383 HP

[js27]

Looking for a complete 70 383 HP . Assembly date of the 2nd week of November of 69. Or close to it.
Thanks,
AL

[The Cuda Guy]

Al

This is the best I could do:

http://www.heminet.com/mopar-classified-ads/mopar-parts-for-sale-17.asp?aspDBBut_17=aspDBgoForm::11&aspDBUnit=_17&aspDBClick_17=index::11

Semper Fi
The Cuda Guy

[brian]

I have a 70 383 2bbl. . If you would be interested in that I can try to find out when it was assembled.

[js27]

Thanks anyway Brian but it has to be a HP motor.

[js27]

Thanks Cuda Guy I'll check it out.

[Dark Horse]

where you located? Im gonna look at 2 complete 383's not sure of dates though, how much they worth to ya?if numbers match up? gotta know its a long haul (9hr drive) I dont want them,but ill get them knowing you'll take them off my hands. He has a daytona,thats what im going to look at.plus some 727's and rearends to boot.. hopefully it will be a good haul!

[js27]

Dark Horse,
I live near Scranton Pa. Where are you from??
The price depends on the condition. It must be a rebuildable 70--383--HP. Assembly date around the  first week of November.
Thanks
AL

[Dark Horse]

im in california..

[pandamarie]

I have a complete 383 that came out of my 70 challenger R/T. never checked the date code but the #s match. it has been rebuil though. 40 over trw flat tops 10-10 crank(steel) windage tray mildon high volume oil pump, balanced, has a elderbrock torquer on it with 906 heads and high performance exhaust manifolds. bottom end was rebuilt and ran in my 69 charger ahs about 12000 miles on it heads were never done and has 2 burnt exhaust valves. pulled it because I finished my 440. also has a six pack cam in it and double roller timing chain.

[js27]

Hey Pandamarie,
Please check the assembly date code on the pad. It's on the left side of engine (under the dist.) let me know what it is. Where is the motor now(state).
Thanks,
AL

[pandamarie]

Hi Al.
The date code on this motor is 5-70 will that due for you? also I belive the heads were switched at one time to 906s from a 69 charger. you would have nothing to due to this motor but exhaust gaskets and a valve job. if your interested email me at
pandamarie@jps.net
I live in sacramento calif.

[js27]

Pandymarie,
Sorry but thanks anyway that is way too late for me. I am looking for a 11-69 date code.
Thanks Again for your help.
AL