Excuse me while I vent ...one moment please

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Excuse me while I vent ...one moment please  (Read 1149 times)

    Offline OUTLAW

    • MASTER OF ALL THINGS MOPAR
    • Sr. Member
    • ****
    • Posts: 1002
    • I didn't say you can't RACE--I said you can't WIN
      • MOPAR-MADNESS WEB/FORUM
    Excuse me while I vent ...one moment please
    « on: April 07, 2005 - 12:30:21 PM »
    F*CK  F*CK  F*CK!!!!
    It never fails ...I go to do a little preventative maintainance surgery and I end up getting a full frontal lobotomy.Dropped the tranny to replace the throw out bearing ..only! And I find the pilot bushing looks like it was 2 piece ...one slid inside the other. One is in the crank and a smaller one is ballanced in the splines of the clutch. tryin to fish one out I dropped it in the pressure plate anyway. May I repeat  "F*CK F*CK F*CK It Never Fails"
    I did not want to pull the scattersheild under any condition...originally.I'm so far behind at work I didnt need this tieing up a bay. I planned on this being a simple in and out (a couple hours) while I waited for parts and machine work to com back from machine shop!!



    Thanks I needed that!!!!!!!
    Logged


    Offline BB73Challenger

    • Sr. Member
    • ****
    • Posts: 1797
    • 2 cars - twice the wrenching... yay?
    Re: Excuse me while I vent ...one moment please
    « Reply #1 on: April 07, 2005 - 01:25:21 PM »
    bummer - I hate that whole can of worms deal.  :bs:

    If it makes you feel any better, it's happened probably to all of us.
    Logged
    Jeff from Cleveland, Ohio

    Offline Burpin Chunks

    • Sr. Member
    • ****
    • Posts: 1519
    • http://mikescuda.net/cuda-challenger/burpin_chunks
    Re: Excuse me while I vent ...one moment please
    « Reply #2 on: April 07, 2005 - 01:27:03 PM »
    Burpin can relieve your stress. Burpin will be there tomorrow to pick up the car.
    Logged

    Offline 6pkrunner

    • Full Member
    • ***
    • Posts: 661
    • Evil Monkey in Runner
    Re: Excuse me while I vent ...one moment please
    « Reply #3 on: April 07, 2005 - 01:36:34 PM »
    Whose postulate was that "Murphy was an optomist?"

    Bad luck indeed. Get someone with long thin fingers to fish around in the PP. ;D

    Sorry J/K - and when you dro pthe scattershield and PP you'll see the flywheel needs resurfacing and the PP has heat cracks in it.
    Logged

    Offline Rev-It-Up

    • Global Moderator
    • Permanent Resident
    • *****
    • Posts: 10601
    • Member Since 2/20/02
    Re: Excuse me while I vent ...one moment please
    « Reply #4 on: April 07, 2005 - 01:38:06 PM »
    Errrrrgggggh!!  I understand your frustration and like BB73 said...we've all been there...and hate it.  Sorry Outlaw!

    Logged
    Rev-It-Up                                                             Yes, I'm a girl!
                             

    Offline OUTLAW

    • MASTER OF ALL THINGS MOPAR
    • Sr. Member
    • ****
    • Posts: 1002
    • I didn't say you can't RACE--I said you can't WIN
      • MOPAR-MADNESS WEB/FORUM
    Re: Excuse me while I vent ...one moment please
    « Reply #5 on: April 07, 2005 - 02:23:50 PM »
    thanks guys  I know we all have our days but clutch tranny trouble was the lastthing I expected as its all brand new and doesnt have 3000 miles on it
    and as 6pkrunner said
    Quote
    and when you dro pthe scattershield and PP you'll see the flywheel needs resurfacing and the PP has heat cracks in it.[/quote}


    since I made this flywheel myself I expect now to see the crank screwed up too ...LOL
    Logged

    Offline 6pkrunner

    • Full Member
    • ***
    • Posts: 661
    • Evil Monkey in Runner
    Re: Excuse me while I vent ...one moment please
    « Reply #6 on: April 07, 2005 - 04:44:00 PM »
    Whenever I do anything of a maintainence/ update (other than a fresh total restoration/restification) I allow for the absolute worst possible. That way I am around 50% happy when things aren't as bad as I had expected. ;D

    You made the flywheel? Ummm  - you're a machinist perchance?
    Logged

    Offline OUTLAW

    • MASTER OF ALL THINGS MOPAR
    • Sr. Member
    • ****
    • Posts: 1002
    • I didn't say you can't RACE--I said you can't WIN
      • MOPAR-MADNESS WEB/FORUM
    Re: Excuse me while I vent ...one moment please
    « Reply #7 on: April 07, 2005 - 05:55:41 PM »
    not made as foundry but I did the balancing and lightning etc ...its a one of a kind flywheel
    Logged
    Pages: [1]
    « previous next »