News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Can TTI 1.625 to 1.750 stepped headers...  (Read 1211 times)

    Offline elevenssc

    • Jr. Member
    • **
    • Posts: 226
    Can TTI 1.625 to 1.750 stepped headers...
    « on: April 25, 2015 - 03:58:03 PM »
    ...be mounted to my 340 before installing it back in my 1970 Cuda, or do they need to be installed after the motor is in the car?

    These are TTI 340BE headers (above the steering link)
    Logged


    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: Can TTI 1.625 to 1.750 stepped headers...
    « Reply #1 on: April 25, 2015 - 04:42:39 PM »
    The way I do it yes , I install the engine on the K frame from the bottom , easy & fast to install & the engine can be complete going in .
     If you are installing from the top the headers cannot be attched while installed
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline elevenssc

    • Jr. Member
    • **
    • Posts: 226
    Re: Can TTI 1.625 to 1.750 stepped headers...
    « Reply #2 on: April 25, 2015 - 04:54:37 PM »
    Thanks Chryco...that answers my question :2thumbs:
    Logged

    Offline 1970A-66Challenger

    • Jr. Member
    • **
    • Posts: 29
    Re: Can TTI 1.625 to 1.750 stepped headers...
    « Reply #3 on: April 25, 2015 - 09:03:57 PM »
    Set them in place as you are lowering the engine in. They fit pretty tight around the torsion bars, so not sure how easy it would be if the engine is on the k member.
    Logged

    Offline elevenssc

    • Jr. Member
    • **
    • Posts: 226
    Re: Can TTI 1.625 to 1.750 stepped headers...
    « Reply #4 on: April 25, 2015 - 09:51:50 PM »
    1970A-66Challenger---great advice. I was wondering if that was a possibility :2thumbs:
    Logged
    Pages: [1]
    « previous next »