Vintage Air Install 70 Barracuda BB

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Vintage Air Install 70 Barracuda BB  (Read 1494 times)

    Offline chaosrob

    • Jr. Member
    • **
    • Posts: 20
    Vintage Air Install 70 Barracuda BB
    « on: July 14, 2019 - 11:41:09 AM »
    I am getting ready to install vintage air on my non air 1970 383 4 speed Barracuda.  Just curious if those who have done this in the past could share any pitfalls/tricks/tips learned from their experience I would appreciate it greatly
    Logged


    Offline chaosrob

    • Jr. Member
    • **
    • Posts: 20
    Re: Vintage Air Install 70 Barracuda BB
    « Reply #1 on: July 25, 2019 - 05:10:53 PM »
    I'm about 2/3 of the way through this install, just figured out that I need different pulleys (will be here tomorrow).  The installation is far more involved than the instructions would lead you to believe, and some of the instructions are downright incorrect.  Will be glad to put this behind me lol
    Logged

    Offline chaosrob

    • Jr. Member
    • **
    • Posts: 20
    Re: Vintage Air Install 70 Barracuda BB
    « Reply #2 on: July 26, 2019 - 10:53:41 AM »
    Because I have a rack and pinion installed the a/c compressor bracket will not work in my car.  I am just going to go serpentine on it.  It will add a few days delay but at least I wont have to worry about squealing belts lol
    Logged

    Offline 4Cruizn

    • Administrator
    • C-C.com Expert
    • *****
    • Posts: 18521
    • HEMI FISH
    Re: Vintage Air Install 70 Barracuda BB
    « Reply #3 on: July 26, 2019 - 11:14:18 AM »
    Quote from: chaosrob on July 26, 2019 - 10:53:41 AM
    Because I have a rack and pinion installed the a/c compressor bracket will not work in my car.  I am just going to go serpentine on it.  It will add a few days delay but at least I wont have to worry about squealing belts lol

    Not sure the serpentine system will eliminate the chance of squealing noise . . . certainly still could have issues . . .
    Logged

    Offline chaosrob

    • Jr. Member
    • **
    • Posts: 20
    Re: Vintage Air Install 70 Barracuda BB
    « Reply #4 on: July 26, 2019 - 02:03:25 PM »
    out of 6 serpentine retrofits on different lsa/ls swaps I have never had an issue.  I cannot say the same for retaining v belts on classics.
    Quote from: 4Cruizn on July 26, 2019 - 11:14:18 AM
    Not sure the serpentine system will eliminate the chance of squealing noise . . . certainly still could have issues . . .
    Logged

    Offline chaosrob

    • Jr. Member
    • **
    • Posts: 20
    Re: Vintage Air Install 70 Barracuda BB
    « Reply #5 on: August 06, 2019 - 10:43:53 PM »
    Finally finished this up , turned out to be far more of a bear than I expected. some of which was just the modifications on my car.

    To simplify the compressor mounting I went ahead and purchased the cvf serpentine kit.  Initially I was shipped the wrong spacers so the pulleys didn't align but CVF overnighted the correct ones to me and all was right in the world.  Once the pulley setup was taken care of it went fairly smoothly.

    Overall the instructions are very lacking on the vintage air side in my opinion and some of it is just wrong.  Once installed however the kit works very well, blows very strong and I am very happy with the end result.
    Logged

    Offline 360FISH

    • Full Member
    • ***
    • Posts: 705
    • BS23H3B567746
    Re: Vintage Air Install 70 Barracuda BB
    « Reply #6 on: August 07, 2019 - 12:17:56 AM »
    I'd love to see some pictures if you have them.  This is one of those things still on my list.

    Hope it performs well for a long time.

    :)
    Logged
    1973 ‘Cuda   Semi-Pro Touring
    360 SB - 518/OD auto tranny - FAST EZ EFI - Edelbrock Fuel sump - HHR fan
    Hella H4 headlights on relays - 97 Dodge Avenger seats - Chin spoiler - Bumpers pulled in to ’72 offset

    Build: http://www.cuda-challenger.com/cc/index.php?topic=74674.0

    Offline chaosrob

    • Jr. Member
    • **
    • Posts: 20
    Re: Vintage Air Install 70 Barracuda BB
    « Reply #7 on: August 07, 2019 - 10:39:48 AM »
    I still have a few things to clean up to make them more to my liking but this is how it is currently sitting








    Quote from: 360FISH on August 07, 2019 - 12:17:56 AM
    I'd love to see some pictures if you have them.  This is one of those things still on my list.

    Hope it performs well for a long time.

    :)
    Logged

    Offline 70chall440

    • Sr. Resident
    • ******
    • Posts: 6484
    Re: Vintage Air Install 70 Barracuda BB
    « Reply #8 on: August 07, 2019 - 11:52:41 AM »
    Looks like a clean install.
    Logged
    Current Mopar
    70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
    05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
    Past Mopars
    9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)

    Offline chaosrob

    • Jr. Member
    • **
    • Posts: 20
    Re: Vintage Air Install 70 Barracuda BB
    « Reply #9 on: August 07, 2019 - 09:48:22 PM »
    Thank you
    Logged

    Offline 4Cruizn

    • Administrator
    • C-C.com Expert
    • *****
    • Posts: 18521
    • HEMI FISH
    Re: Vintage Air Install 70 Barracuda BB
    « Reply #10 on: August 08, 2019 - 10:05:27 AM »
    WOW that looks great!  Nice Job!   :thumbsup:
    Logged
    Pages: [1]
    « previous next »