Cruise Control/Automatic Speed Control

[hemiken]

Hi guys, just wondering if any of you can help me out with some engine bay pictures of E-body Mopars with factory Cruise Control fitted please. Any engine optioned car please, the unit set up should be the same, but i do know that their is a bracket that goes to the carb that is different from Small Block to Big Block. Thank you.

[Rikuma]

Maby like this?

[AARTA340]

The picture above  should be very helpful. On the inner fender you will see three indentions on the top. This is where the bracket screws/bolts to. I am away from my car and not able to get an actual picture, but the info above and the placement of the bracket should benefit you. Goodluck.

[hemiken]

Thank you so much guys, these will come in useful, but if you do get a chance to take more close detailed shots, that would be very much appreciated please. Thank you both again for your help so far.

[edl94]

73 340 car

[edl94]

I just looked at you're post again here is the carb setup.

[hemiken]

Hey edl94, thanks for posting these pictures up . I wonder why they changed the mounting position on the later model cars Do you have pictures showing where the cables run from in and out of the control module on the inner fender too please.

[edl94]

This is the only other one I have. I took these before I tore the car apart, did not reinstall the cruise. It would not work with the 440 EFI setup.

[hemiken]

Hey, thanks again for another picture, it shows the actuator good.
Anyone else can share different shots please.

[don340-4]

 
  Here are few of my 70 RT/SE

   
     

[hemiken]

Thank you so much Don, these pictures will be very helpful also. Nice car by the way