Aftermarket K members

[saltymopar]

I want to ask you guys. if any of you have seen better pictures of this K Member that Delaney Auto design built for there V-10 viper powered Challenger only picture I've seen is this one http://www.popularhotrodding.com/features/0902phr_1970_dodge_challenger/photo_17.html# it states that they used splined torsion bars internally in the design. so my guess is there using sprint car torsion bars. I'm just curious if anyone seen this K- Member or has pictures. i'm interested in the overall design it a nice picture of the mini rack and Z-bar setup for the steering. oh and while im posting here's a few pictures of my 70 chally the motor pic a little old but pretty close to current.   

[Chryco Psycho]

I have not seen this K frame & I have no clue from the pix where the T bars are incorporated into it , if the pic was backed off a distance it woul dba clearer

[saltymopar]

Chryco that what I'm looking for a picture that backed off is all i need, but i have a feeling they cropped the picture to hide most of the front suspension. I can see just the front mount of the lower control arm in the far right of the picture and that about it. if you look through the pictures you can see the rear suspension has T-bars as well built into the sub frame.   http://www.popularhotrodding.com/features/0902phr_1970_dodge_challenger/photo_16.html#     i would almost worry about the aluminum z bar striping if really abused hard.     

[Chryco Psycho]

You would have to use Steel for a spring , alum would just crack , let me know if you find other pix or info