Author Topic: Challenger T/A exhaust tip Question (Read 3125 times)

anlauto · « **Reply #15 on:** April 16, 2014 - 09:57:55 PM »

Quote from: burdar on April 16, 2014 - 09:44:51 PM

The fastener guide shows the same bolts as above. (6) 1/4-20 x .62" hex head SEMS bolts with paint cutter and pilot point. Phosphate finish. They have an EL with a circle around it on the head.

The fastener guide doesn't say anything about nuts or a retainer plate for the bolts.

Yes I read that too

Author Topic: Challenger T/A exhaust tip Question (Read 3125 times)

anlauto

Re: Challenger T/A exhaust tip Question