News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Steering Box Leaking on top?  (Read 738 times)

    Offline EMCD

    • Full Member
    • ***
    • Posts: 849
    Steering Box Leaking on top?
    « on: April 21, 2014 - 10:06:40 AM »
    The round top of the steering box has fluid pooled near the top. the box is a napa reman unit. i'm running a GM pump. could it be too much pressure causing the box to leak? or, do napa units suck?
    Logged


    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: Steering Box Leaking on top?
    « Reply #1 on: April 21, 2014 - 04:28:57 PM »
    I assume you are talking about the upper nut where the steering column connects to the shaft if so it is a bad rebuild not too much pressure , I would clean it up & look for the leak though
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline 1971Challenger

    • Jr. Member
    • **
    • Posts: 39
    Re: Steering Box Leaking on top?
    « Reply #2 on: April 27, 2014 - 01:04:02 PM »
    I had a similar issue last year. Turned out to be a pinhole in my power steering line and it was leaking at collecting at the exact same spot. Might want to check your hoses / lines, not a bad idea anyway, good luck   :)
    Logged
    "Understeer" is when you hit the fence with the front of the car. "Oversteer" is when you hit the fence with the rear of the car. "Horsepower" is how fast you hit the fence. "Torque" is how far you take the fence with you.

    Offline 1970A-66Challenger

    • Jr. Member
    • **
    • Posts: 29
    Re: Steering Box Leaking on top?
    « Reply #3 on: April 27, 2014 - 07:01:04 PM »
    I had the same problem with a reman'd autozone box. Underneath the round part of the box there is an o-ring. It was pinched/split in my case. Replaced o-ring, no more leaks.
    Logged
    Pages: [1]
    « previous next »