Magnaflow X pipe point up or down

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Magnaflow X pipe point up or down  (Read 2350 times)

    Offline crash340

    • Sr. Member
    • ****
    • Posts: 1291
    Magnaflow X pipe point up or down
    « on: June 29, 2014 - 07:42:34 AM »
    Hi Fellow Magnaflow people,
    Im installing my X pipe Magnaflow system, when installing the X pipe section, the short ends face forward, the long ends go into the mufflers, with regard to the short ends facing forward, once installed, do they point slightly up or slightly down???
    I have then during trial fit pointing up, looks ok at this point, if I was to point them down (that is flip the X pipe section) it would lift the pipes and give them more ground clearance but the park brake cables would be tight over the pipes.

    Any idea's???

    Greg
    Logged
    Greg

    73 Cuda
    Brisbane, Australia


    Offline dfrazz

    • 1970 Cuda - 1968 Charger
    • Resident
    • *****
    • Posts: 4070
    Re: Magnaflow X pipe point up or down
    « Reply #1 on: June 29, 2014 - 08:52:21 AM »
    My TTI H-pipe points down if that helps.
    Logged

    Offline thedodgeboys

    • Resident
    • *****
    • Posts: 3633
    • ''Normal’s Overrated''
      • THE DODGE BOYS
    Re: Magnaflow X pipe point up or down
    « Reply #2 on: June 29, 2014 - 09:30:03 AM »
    I put mine on pointing down, I used the 3 inch kit and wanted it high and tight..
    Logged
    Go Fast & Have Fun...
    70 6.1 HEMI 6-speed Drop Top...

    Offline crash340

    • Sr. Member
    • ****
    • Posts: 1291
    Re: Magnaflow X pipe point up or down
    « Reply #3 on: June 29, 2014 - 04:20:06 PM »
    Thanks guys,
    How did you get around the EB cable problem? or didnt you worry about it?
    Logged
    Greg

    73 Cuda
    Brisbane, Australia

    Offline 67vertman

    • Sr. Resident
    • ******
    • Posts: 5125
    • Member since 9-23-2005
    Re: Magnaflow X pipe point up or down
    « Reply #4 on: July 01, 2014 - 12:59:28 PM »
    With my TTIs i didn't have an EB issue.  What issue are you encountering?
    Logged



    Ron - Born and raised in Southern California

    I got the 1970 Cuda, but still need the hot blonde to ride shotgun!

    First car -1969 Road Runner 383 4sp

    Current ride - 1970 Barracuda 440-6 4 sp Dana 60  (4:10)

    Offline crash340

    • Sr. Member
    • ****
    • Posts: 1291
    Re: Magnaflow X pipe point up or down
    « Reply #5 on: July 01, 2014 - 05:15:17 PM »
    None yet but, right now I have the pipes pointing up which means they are not tucked up super tight and the cables are limiting the pipes going higher a little, let me play with them some over this weekend and I'll take some pics and post.
    It's really just the wire hook that attaches to the tranny crossmember that holds the cables that go back either side
    Logged
    Greg

    73 Cuda
    Brisbane, Australia

    Offline dfrazz

    • 1970 Cuda - 1968 Charger
    • Resident
    • *****
    • Posts: 4070
    Re: Magnaflow X pipe point up or down
    « Reply #6 on: July 01, 2014 - 07:44:38 PM »
    Mine H-pipe clears - no issues


    Logged

    Offline crash340

    • Sr. Member
    • ****
    • Posts: 1291
    Re: Magnaflow X pipe point up or down
    « Reply #7 on: July 01, 2014 - 08:08:09 PM »
    Dfrazz
    the Cuda has a slightly different cable set up,, thanks for posting pics, gives a good perspective
    Logged
    Greg

    73 Cuda
    Brisbane, Australia

    Offline dfrazz

    • 1970 Cuda - 1968 Charger
    • Resident
    • *****
    • Posts: 4070
    Re: Magnaflow X pipe point up or down
    « Reply #8 on: July 01, 2014 - 08:17:36 PM »
    Quote from: crash340 on July 01, 2014 - 08:08:09 PM
    Dfrazz
    the Cuda has a slightly different cable set up,, thanks for posting pics, gives a good perspective

    I didn't know.  Thanks and hope it helps.
    Logged

    Offline crash340

    • Sr. Member
    • ****
    • Posts: 1291
    Re: Magnaflow X pipe point up or down
    « Reply #9 on: July 05, 2014 - 12:51:41 AM »
    Here is a pic of my issue,
    I have flipped the x pipe to now pont down, all good, happy with this, the EB cable naturally wants to sit about two thirds the way up through the pipe, if I put the cable either over or under it will rub on the pipes. I could relocate the hook rod on the trans crossmember higher I guess to hold the cables hard agains the floor, very near the drive shaft, this would get around the pipe issue and also hold the adjuster rod up high as its kind of hanging down right now begging for being torn off.

    any words of wisdom?

    Greg
    Logged
    Greg

    73 Cuda
    Brisbane, Australia

    Offline crash340

    • Sr. Member
    • ****
    • Posts: 1291
    Re: Magnaflow X pipe point up or down
    « Reply #10 on: July 05, 2014 - 12:52:35 AM »
    oh, here is the pic,,, :banghead:
    Logged
    Greg

    73 Cuda
    Brisbane, Australia

    Offline bert

    • Jr. Member
    • **
    • Posts: 53
    Re: Magnaflow X pipe point up or down
    « Reply #11 on: August 19, 2014 - 05:05:15 PM »
    This is how I put my exhaust on but the cable are different too
    Logged

    Offline CudamanTom

    • Resident
    • *****
    • Posts: 2670
    Re: Magnaflow X pipe point up or down
    « Reply #12 on: August 19, 2014 - 06:21:58 PM »
    Quote from: bert on August 19, 2014 - 05:05:15 PM
    This is how I put my exhaust on but the cable are different too

    The cable arrangement is different from 70 to 71.

    Nice setup BTW.  :2thumbs: :ylsuper:
    Logged
    1971 Cuda Vert 440-833 - (clone)
    1971 Cuda 440-727 - (clone)


    Because I like it fast!!!

    Offline dodj

    • Sr. Resident
    • ******
    • Posts: 6197
    Re: Magnaflow X pipe point up or down
    « Reply #13 on: August 19, 2014 - 07:31:07 PM »
    WOW! How much time do you spend polishing the exhaust? Looks good!  :2thumbs:
    Logged
    Scott
    1973 Challenger  440 4 spd 
    2007.5 3500 6.7 Cummins Diesel, Anarchy tuned.
    Good friends don't let friends do stupid things. ........alone.

    Offline Racer57

    • Sr. Member
    • ****
    • Posts: 1489
    Re: Magnaflow X pipe point up or down
    « Reply #14 on: August 19, 2014 - 09:51:27 PM »
    Quote from: bert on August 19, 2014 - 05:05:15 PM
    This is how I put my exhaust on but the cable are different too

    That ain't the only thing that's different !!!    :clapping:
    Logged
    Pages: [1]
    « previous next »