Author Topic: Best Way To Adjust The Bands In A 727 Without Using Torque Wrench. (Read 1246 times)

Oldschool · « **on:** April 30, 2014 - 12:20:28 PM »

Transmission has good stuff in it and has never given me any problems. This Friday I am going to change the filter and pan gasket and then flush the trans/converter. I was wanting to adjust the bands while I had the pan off and it has been so long since I have done this, I can't remember how I did it. I know I used to keep them adjusted on my other performance Mopars and I never used an Inch/Pounds torque wrench. I just did it by feel. Anyone here do this recently and remember how to do it by feel alone? Thanks in advance....

Oldschool · « **Reply #1 on:** May 02, 2014 - 10:21:18 AM »

Thanks for all the help...

J/K...

When I got under the car and started looking around, it all came back to me. Simple actually....

dutch · « **Reply #2 on:** May 02, 2014 - 05:02:18 PM »

brasil · « **Reply #3 on:** June 17, 2014 - 04:52:01 PM »

sorry to tell you this...but by feel you can be way off the right Setting ! I would always use a torque wrench to adjust the bands...
The difference between "feel" and the real torque is around 1-1.5 turns at the screw !!!That�s a lot. I checked it out by my self some weeks ago.. 1st by feel..and then I made the "test"...with the torque wrench...

Greetings Juergen

Author Topic: Best Way To Adjust The Bands In A 727 Without Using Torque Wrench. (Read 1246 times)

Oldschool

Best Way To Adjust The Bands In A 727 Without Using Torque Wrench.

Oldschool

Re: Best Way To Adjust The Bands In A 727 Without Using Torque Wrench.

dutch

Re: Best Way To Adjust The Bands In A 727 Without Using Torque Wrench.

brasil

Re: Best Way To Adjust The Bands In A 727 Without Using Torque Wrench.