News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: 1 [2]

    Author Topic: So.. My header slaps my T bar  (Read 3640 times)

    Offline cudabob496

    • Sr. Resident
    • ******
    • Posts: 8024
    Re: So.. My header slaps my T bar
    « Reply #15 on: June 04, 2014 - 05:52:23 PM »
    Quote from: HP2 on June 04, 2014 - 04:19:28 PM
    True.

    I tend to not be a fan of poly transmission mounts, however. This is because if you take some flex out of the mounting system at this point, you run the risk of the aluminum trans case becoming the flex point and cracking it if a motor mount fails.

    $100 Shumacher Torque Strap is a great device!
    Logged
    72 Cuda, owned 25 years. 496, with ported Stage VI heads, .625 in solid roller, 254/258 at .050, 3500 stall, 3.91 rear. 850 Holley DP, Reverse manual valve body.

    1999 Trans Am, LS1, heads, cam, headers, stall, etc! Love to surprise the rice rockets with this one. They seem so confident, then it's "what the heck just happened?"

    2011 Kawasaki Z1000


    Offline dodj

    • Sr. Resident
    • ******
    • Posts: 6197
    Re: So.. My header slaps my T bar
    « Reply #16 on: June 04, 2014 - 05:57:22 PM »
    Quote from: cudabob496 on June 04, 2014 - 05:52:23 PM
    $100 Shumacher Torque Strap is a great device!
    Or a $5 piece of chain. :2cents:
    Logged
    Scott
    1973 Challenger  440 4 spd 
    2007.5 3500 6.7 Cummins Diesel, Anarchy tuned.
    Good friends don't let friends do stupid things. ........alone.

    Offline cudabob496

    • Sr. Resident
    • ******
    • Posts: 8024
    Re: So.. My header slaps my T bar
    « Reply #17 on: June 04, 2014 - 07:04:14 PM »
    Quote from: dodj on June 04, 2014 - 05:57:22 PM
    Or a $5 piece of chain. :2cents:


    that would work, but the torque strap is adjustable, with rubber busings.

    http://www.engine-swaps.com/Pages/ProductsType/TorqueStraps.html

    « Last Edit: June 04, 2014 - 07:06:53 PM by cudabob496 »
    Logged
    72 Cuda, owned 25 years. 496, with ported Stage VI heads, .625 in solid roller, 254/258 at .050, 3500 stall, 3.91 rear. 850 Holley DP, Reverse manual valve body.

    1999 Trans Am, LS1, heads, cam, headers, stall, etc! Love to surprise the rice rockets with this one. They seem so confident, then it's "what the heck just happened?"

    2011 Kawasaki Z1000

    Offline stinger

    • Jr. Member
    • **
    • Posts: 424
    Re: So.. My header slaps my T bar
    « Reply #18 on: June 04, 2014 - 08:41:47 PM »
    Quote from: dodj on June 04, 2014 - 05:57:22 PM
    Or a $5 piece of chain. :2cents:

    my chain was free  :bigsmile:
    Logged

    Offline HP2

    • Resident
    • *****
    • Posts: 4478
    Re: So.. My header slaps my T bar
    « Reply #19 on: June 05, 2014 - 10:25:02 AM »
    I've made my own with two $5 rod ends and a piece of pipe. Looks more purposeful than chain, although I have used chain before as well.
    Logged

    Offline stinger

    • Jr. Member
    • **
    • Posts: 424
    Re: So.. My header slaps my T bar
    « Reply #20 on: June 08, 2014 - 08:54:41 AM »
    Fixed! I installed the poly mount and made things worse as the old mount had some up and down movement to it the new mount raised up the tail of the trans and moved the whole exhaust into the t bars and frame. so........ I lowered the transmount and cross member some and found enough room.
    took the car for a spin and no driveline issues for what I could tell. :bigsmile:
    Logged

    Offline dutch

    • Sr. Resident
    • ******
    • Posts: 6944
    Re: So.. My header slaps my T bar
    « Reply #21 on: June 08, 2014 - 11:22:29 AM »
    how fast did you drive after that mod? 
    Logged
    *** Bart ***

    Offline stinger

    • Jr. Member
    • **
    • Posts: 424
    Re: So.. My header slaps my T bar
    « Reply #22 on: June 08, 2014 - 12:01:11 PM »
    up to 60 mph
    Logged
    Pages: 1 [2]
    « previous next »