Author Topic: dash wiring  (Read 674 times)

Offline elmoska

  • Jr. Member
  • **
  • Posts: 155
dash wiring
« on: July 24, 2014 - 08:15:05 PM »
can some of you help me identify some connector for the dash.

#1 the black connector with two wire ( black and blue )






#2







#3 near the fuse box and what i think is the time delay relay. there is a connecter with one wire and a wire all by itself, both yellow.




#4 is there another connector that goes on the little tab for the lighter.


1974 challenger on its way..




Offline ShelbyDogg

  • Sr. Resident
  • ******
  • Posts: 5007
Re: dash wiring
« Reply #1 on: July 25, 2014 - 11:48:21 AM »
#1 Not sure about this one. The Rallye harness that I have out does not have it.
#2 looks like the emergency flasher or turn signal blinker connector. One clips to the side of the pedal assembly, the other one clips next to the ashtray.
#3 This yellow wire supplies the power to your light group lights. One goes to the ignition switch light, my other one is not plugged in like yours.
#4 Yes the cig lighter only used one wire. The ground came from the dash frame.
« Last Edit: July 27, 2014 - 09:28:23 AM by ShelbyDogg »
Rob

3 E-bodies, Megasquirt-1v3.0, Edelbrock Pro-Flo-1, Holley C950, FAST EZ-EFI; say no to carbs...yes to throttle bodies

My Pace Car restoration thread:
http://www.cuda-challenger.com/cc/index.php?topic=44869.0


Offline elmoska

  • Jr. Member
  • **
  • Posts: 155
Re: dash wiring
« Reply #2 on: July 25, 2014 - 09:48:32 PM »
i did not mention its for a 74 challenger rally dash
1974 challenger on its way..

Offline ShelbyDogg

  • Sr. Resident
  • ******
  • Posts: 5007
Re: dash wiring
« Reply #3 on: July 27, 2014 - 09:30:52 AM »
Modified my #3 in the prior post.

#4 could be for the fasten seatbelt light?   I don't have one in my 70 and 71 harnesses so I'm not sure.

You could look for it here:
http://www.mymopar.com/downloads/1974/74BarracudaB.JPG
Rob

3 E-bodies, Megasquirt-1v3.0, Edelbrock Pro-Flo-1, Holley C950, FAST EZ-EFI; say no to carbs...yes to throttle bodies

My Pace Car restoration thread:
http://www.cuda-challenger.com/cc/index.php?topic=44869.0