Author Topic: Bullet connector diam (Read 889 times)

crash340 · « **on:** September 02, 2014 - 07:23:10 AM »

Under the dash is a yellow molded three socket accessory socket that accepts bullet type crimp lugs. Does anyone know what diameter the bullet parts is or is it a standard 0.156" diameter bullet?

Greg

Chryco Psycho · « **Reply #1 on:** September 02, 2014 - 10:03:09 AM »

it is not a std size connector , I have never found a source for them , you can open up the ones that are available or remove them from other damaged harnesses

HP_Cuda · « **Reply #2 on:** September 02, 2014 - 12:33:03 PM »

Like Neil said, I opened up the bullets I had to make them work.

No prob.

1 Wild R/T · « **Reply #3 on:** September 02, 2014 - 01:06:41 PM »

There are two std size bullet connectors, .157 & .188, I just measured a OE mopar bullet & it is .185... So I'm guessing it's just squeezed a little & should be .188...

http://shop.advanceautoparts.com/p/dorman-conduct-tite-16-14-gauge-male-bullet-connector-.188-in.-blue-85457/22141149-p?cm_mmc=ACQ-_-Google-_-GPLA-_-22141149&ci_src=17588969&ci_sku=22141149&ci_gpa=pla&ci_kw=&iv_=__iv_p_1_a_pla_y_6201684_f_online_o_22141149_z_US_i_en_j_73682442742_s__n_g_t__d_c_v__&gclid=CjwKEAjw1ZWgBRD-n6ew0oan1xwSJABAbf8pB-JAmDwwSzDqviox6CuMlO5cDBVit3T7OPMpjblSnRoCRmDw_wcB

crash340 · « **Reply #4 on:** September 02, 2014 - 03:18:45 PM »

Thanks Gents,
I'll go shopping today and see what I can find, wish me luck! I want to use this plug to connect my A/F ratio gauge and Roll Control.

Author Topic: Bullet connector diam (Read 889 times)

crash340

Bullet connector diam

Chryco Psycho

Re: Bullet connector diam

HP_Cuda

Re: Bullet connector diam

1 Wild R/T

Re: Bullet connector diam

crash340

Re: Bullet connector diam