Rally Dash wiring questions

[HP_Cuda]

The one listed for radio is in the picture below and it's next to the yellow connector.

Can you take a pic of the other one with the blue wire? I believe the one you are talking about is used to plug into the flasher near the ash tray.

[6771plymouth]

hey danbob it looks like your car is b5 blue  coild you post some pics im also building a b5 cuda would like to

[Danbobracer]

6771plymouth the car is actually GB2.

[Danbobracer]

The one with the blue wire is pictured in one of my first posts on this thread and it's right next to the yellow wires you just posted a pic of? Thats the one i thot was for radio, but that being said, whats the one just like it but without the blue wire that is over by the ash tray for?

Also, What are those yellow wires for?

Thanks for your help.

[HP_Cuda]

Tom already pointed out - Yellow bullet connector/wires is battery accessory

Someone added a blue wire to your radio plug - I would trace the blue wire and see where it goes because you will find it probably is used for another accessory.

As for the other one that is near the ashtray thats for the flasher unit. It plugs into the side of the ashtray to stay out of the way.

[Danbobracer]

Ill check that out when i get home from work this afternoon. Thank you. Do you know where i could get a parking brake light switch?

[HP_Cuda]

Rockauto has them no problemo.

[Danbobracer]

HP_Cuda i just checked out rock auto and the have four switches listed under the brake light switch.  This is the only style that looks anything like it would work as a parking brake switch. Is this what you use? and then just ground one tab? Since they don't list it as a parking brake light switch i want to make sure i order the right thing.